Tag Archives: gear box manufacturer

China manufacturer Varitron Cyclo Drive Gear Box Speed Reducer Motor CZPT Harmonic Gear worm and wheel gear

Product Description

Product Description:

1.Flexspline is a hollow flanging standard cylinder structure.

2.There is a large-diameter hollow shaft hole in the middle of the cam of the wave generator. The internal design of the reducer has a support bearing.

3.It has a fully sealed structure and is easy to install. It is very suitable for the occasions where the wire needs to be threaded from the center of the reducer.

Advantages:

The first:High precision,high torque

The second:dedicated technical personnel can be on-the-go to provide design solutions

The third:Factory direct sales fine workmanship durable quality assurance

The fourth:Product quality issues have a one-year warranty time, can be returned for replacement or repair

Company profile:

HangZhou CZPT Technology Co., Ltd. established in 2014, is committed to the R & D plant of high-precision transmission components. At present, the annual production capacity can reach 45000 sets of harmonic reducers. We firmly believe in quality first. All links from raw materials to finished products are strictly supervised and controlled, which provides a CZPT foundation for product quality. Our products are sold all over the country and abroad.

The harmonic reducer and other high-precision transmission components were independently developed by the company. Our company spends 20% of its sales every year on the research and development of new technologies in the industry. There are 5 people in R & D.

Our advantage is as below:

1.7 years of marketing experience

2. 5-person R & D team to provide you with technical support

3. It is sold at home and abroad and exported to Turkey and Ireland

4. The product quality is guaranteed with a one-year warranty

5. Products can be customized

Strength factory:

Our plant has an entire campus The number of workshops is around 300 Whether it’s from the production of raw materials and the procurement of raw materials to the inspection of finished products, we’re doing it ourselves. There is a complete production system

HST-III Parameter:

Model	Speed ratio	Enter the rated torque at 2000r/min		Allowed CZPT torque at start stop		The allowable maximum of the average load torque		Maximum torque is allowed in an instant		Allow the maximum speed to be entered	Average input speed is allowed	Back gap	design life
Model	Speed ratio	NM	kgfm	NM	kgfm	NM	kgfm	NM	kgfm	r / min	r / min	Arc sec	Hour
14	50	6.2	0.6	20.7	2.1	7.9	0.7	40.3	4.1	7000	3000	≤30	10000
	80	9	0.9	27	2.7	12.7	1.3	54.1	5.5
	100	9	0.9	32	3.3	12.7	1.3	62.1	6.3
17	50	18.4	1.9	39	4	29.9	3	80.5	8.2	6500	3000	≤30	15000
	80	25.3	2.6	49.5	5	31	3.2	100.1	10.2
	100	27.6	2.8	62	6.3	45	4.6	124.2	12.7
20	50	28.8	2.9	64.4	6.6	39	4	112.7	11.5	5600	3000	≤30	15000
	80	39.1	4	85	8.8	54	5.5	146.1	14.9
	100	46	4.7	94.3	9.6	56	5.8	169.1	17.2
	120	46	4.7	100	10.2	56	5.8	169.1	17.2
	160	46	4.7	100	10.2	56	5.8	169.1	17.2
25	50	44.9	4.6	113	11.5	63	6.5	213.9	21.8	4800	3000	≤30	15000
	80	72.5	7.4	158	16.1	100	10.2	293.3	29.9
	100	77.1	7.9	181	18.4	124	12.7	326.6	33.3
	120	77.1	7.9	192	19.6	124	12.7	349.6	35.6
32	50	87.4	8.9	248	25.3	124	12.7	439	44.8	4000	3000	≤30	15000
	80	135.7	13.8	350	35.6	192	19.6	653	66.6
	100	157.6	16.1	383	39.1	248	25.3	744	75.9
40	100	308	37.2	660	67	432	44	1232	126.7	4000	3000	≤30	15000

HSG Parameter:

Model	Speed ratio	Enter the rated torque at 2000r/min		Allowed CZPT torque at start stop		The allowable maximum of the average load torque		Maximum torque is allowed in an instant		Allow the maximum speed to be entered	Average input speed is allowed	Back gap	design life
Model	Speed ratio	NM	kgfm	NM	kgfm	NM	kgfm	NM	kgfm	r / min	r / min	Arc sec	Hour
14	50	7	0.7	23	2.3	9	0.9	46	4.7	14000	8500	≤20	15000
	80	10	1	30	3.1	14	1.4	61	6.2
	100	10	1	36	3.7	14	1.4	70	7.2
17	50	21	2.1	44	4.5	34	3.4	91	9	10000	7300	≤20	20000
	80	29	2.9	56	5.7	35	3.6	113	12
	100	31	3.2	70	7.2	51	5.2	143	15
20	50	33	3.3	73	7.4	44	4.5	127	13	10000	6500	≤20	20000
	80	44	4.5	96	9.8	61	6.2	165	17
	100	52	5.3	107	10.9	64	6.5	191	20
	120	52	5.3	113	11.5	64	6.5	191	20
	160	52	5.3	120	12.2	64	6.5	191	20
25	50	51	5.2	127	13	72	7.3	242	25	7500	5600	≤20	20000
	80	82	8.4	178	18	113	12	332	34
	100	87	8.9	204	21	140	14	369	38
	120	87	8.9	217	22	140	14	395	40
32	50	99	10	281	29	140	14	497	51	7000	4800	≤20	20000
	80	153	16	395	40	217	22	738	75
	100	178	18	433	44	281	29	841	86
40	100	345	35	738	75	484	49	1400	143	5600	4000	≤20	20000

Exhibition:
Application case:

FQA:
Q: What should I provide when I choose gearbox/speed reducer?
A: The best way is to provide the motor drawing with parameter. Our engineer will check and recommend the most suitable gearbox model for your refer.
Or you can also provide below specification as well:
1) Type, model and torque.
2) Ratio or output speed
3) Working condition and connection method
4) Quality and installed machine name
5) Input mode and input speed
6) Motor brand model or flange and motor shaft size

Application:	Motor, Machinery, Agricultural Machinery, Hst-IV
Hardness:	Hardened Tooth Surface
Installation:	90 Degree
Layout:	Coaxial
Gear Shape:	Cylindrical Gear
Step:	Single-Step

Samples:	US$ 100/Piece 1 Piece(Min.Order) \| Request Sample

Customization:	Available \| Customized Request

gear

Types of Bevel Gears

Bevel Gears are used in a number of industries. They are used in wheeled excavators, dredges, conveyor belts, mill actuators, and rail transmissions. A bevel gear’s spiral or angled bevel can make it suitable for confined spaces. It is also used in robotics and vertical supports of rolling mills. You can use bevel gears in food processing processes. For more information on bevel gears, read on.

Spiral bevel gear

Spiral bevel gears are used to transmit power between two shafts in a 90-degree orientation. They have curved or oblique teeth and can be fabricated from various metals. Bestagear is one manufacturer specializing in medium to large spiral bevel gears. They are used in the mining, metallurgical, marine, and oil fields. Spiral bevel gears are usually made from steel, aluminum, or phenolic materials.
Spiral bevel gears have many advantages. Their mesh teeth create a less abrupt force transfer. They are incredibly durable and are designed to last a long time. They are also less expensive than other right-angle gears. They also tend to last longer, because they are manufactured in pairs. The spiral bevel gear also reduces noise and vibration from its counterparts. Therefore, if you are in need of a new gear set, spiral bevel gears are the right choice.
The contact between spiral bevel gear teeth occurs along the surface of the gear tooth. The contact follows the Hertz theory of elastic contact. This principle holds for small significant dimensions of the contact area and small relative radii of curvature of the surfaces. In this case, strains and friction are negligible. A spiral bevel gear is a common example of an inverted helical gear. This gear is commonly used in mining equipment.
Spiral bevel gears also have a backlash-absorbing feature. This feature helps secure the thickness of the oil film on the gear surface. The shaft axis, mounting distance, and angle errors all affect the tooth contact on a spiral bevel gear. Adjusting backlash helps to correct these problems. The tolerances shown above are common for bevel gears. In some cases, manufacturers make slight design changes late in the production process, which minimizes the risk to OEMs.

Straight bevel gear

Straight bevel gears are among the easiest types of gears to manufacture. The earliest method used to manufacture straight bevel gears was to use a planer equipped with an indexing head. However, improvements have been made in manufacturing methods after the introduction of the Revacycle system and the Coniflex. The latest technology allows for even more precise manufacturing. Both of these manufacturing methods are used by CZPT. Here are some examples of straight bevel gear manufacturing.
A straight bevel gear is manufactured using two kinds of bevel surfaces, namely, the Gleason method and the Klingelnberg method. Among the two, the Gleason method is the most common. Unlike other types of gear, the CZPT method is not a universal standard. The Gleason system has higher quality gears, since its adoption of tooth crowning is the most effective way to make gears that tolerate even small assembly errors. It also eliminates the stress concentration in the bevelled edges of the teeth.
The gear’s composition depends on the application. When durability is required, a gear is made of cast iron. The pinion is usually three times harder than the gear, which helps balance wear. Other materials, such as carbon steel, are cheaper, but are less resistant to corrosion. Inertia is another critical factor to consider, since heavier gears are more difficult to reverse and stop. Precision requirements may include the gear pitch and diameter, as well as the pressure angle.
Involute geometry of a straight bevel gear is often computed by varying the surface’s normal to the surface. Involute geometry is computed by incorporating the surface coordinates and the theoretical tooth thickness. Using the CMM, the spherical involute surface can be used to determine tooth contact patterns. This method is useful when a roll tester tooling is unavailable, because it can predict the teeth’ contact pattern.
gear

Hypoid bevel gear

Hypoid bevel gears are an efficient and versatile speed reduction solution. Their compact size, high efficiency, low noise and heat generation, and long life make them a popular choice in the power transmission and motion control industries. The following are some of the benefits of hypoid gearing and why you should use it. Listed below are some of the key misperceptions and false assumptions of this gear type. These assumptions may seem counterintuitive at first, but will help you understand what this gear is all about.
The basic concept of hypoid gears is that they use two non-intersecting shafts. The smaller gear shaft is offset from the larger gear shaft, allowing them to mesh without interference and support each other securely. The resulting torque transfer is improved when compared to conventional gear sets. A hypoid bevel gear is used to drive the rear axle of an automobile. It increases the flexibility of machine design and allows the axes to be freely adjusted.
In the first case, the mesh of the two bodies is obtained by fitting the hyperboloidal cutter to the desired gear. Its geometric properties, orientation, and position determine the desired gear. The latter is used if the desired gear is noise-free or is required to reduce vibrations. A hyperboloidal cutter, on the other hand, meshes with two toothed bodies. It is the most efficient option for modeling hypoid gears with noise concerns.
The main difference between hypoid and spiral bevel gears is that the hypoid bevel gear has a larger diameter than its counterparts. They are usually found in 1:1 and 2:1 applications, but some manufacturers also provide higher ratios. A hypoid gearbox can achieve speeds of three thousand rpm. This makes it the preferred choice in a variety of applications. So, if you’re looking for a gearbox with a high efficiency, this is the gear for you.

Addendum and dedendum angles

The addendum and dedendum angles of a bevel gear are used to describe the shape and depth of the teeth of the gear. Each tooth of the gear has a slightly tapered surface that changes in depth. These angles are defined by their addendum and dedendum distances. Addendum angle is the distance between the top land and the bottom surface of the teeth, while dedendum angle is the distance between the pitch surface and the bottom surface of the teeth.
The pitch angle is the angle formed by the apex point of the gear’s pitch cone with the pitch line of the gear shaft. The dedendum angle, on the other hand, is the depth of the tooth space below the pitch line. Both angles are used to measure the shape of a bevel gear. The addendum and dedendum angles are important for gear design.
The dedendum and addendum angles of a bevel gear are determined by the base contact ratio (Mc) of the two gears. The involute curve is not allowed to extend within the base diameter of the bevel gear. The base diameter is also a critical measurement for the design of a gear. It is possible to reduce the involute curve to match the involute curve, but it must be tangential to the involute curve.
The most common application of a bevel gear is the automotive differential. They are used in many types of vehicles, including cars, trucks, and even construction equipment. They are also used in the marine industry and aviation. Aside from these two common uses, there are many other uses for bevel gears. And they are still growing in popularity. But they’re a valuable part of automotive and industrial gearing systems.
gear

Applications of bevel gears

Bevel gears are used in a variety of applications. They are made of various materials depending on their weight, load, and application. For high-load applications, ferrous metals such as grey cast iron are used. These materials have excellent wear resistance and are inexpensive. For lower-weight applications, steel or non-metals such as plastics are used. Some bevel gear materials are considered noiseless. Here are some of their most common uses.
Straight bevel gears are the easiest to manufacture. The earliest method of manufacturing them was with a planer with an indexing head. Modern manufacturing methods introduced the Revacycle and Coniflex systems. For industrial gear manufacturing, the CZPT uses the Revacycle system. However, there are many types of bevel gears. This guide will help you choose the right material for your next project. These materials can withstand high rotational speeds and are very strong.
Bevel gears are most common in automotive and industrial machinery. They connect the driveshaft to the wheels. Some even have a 45-degree bevel. These gears can be placed on a bevel surface and be tested for their transmission capabilities. They are also used in testing applications to ensure proper motion transmission. They can reduce the speed of straight shafts. Bevel gears can be used in many industries, from marine to aviation.
The simplest type of bevel gear is the miter gear, which has a 1:1 ratio. It is used to change the axis of rotation. The shafts of angular miter bevel gears can intersect at any angle, from 45 degrees to 120 degrees. The teeth on the bevel gear can be straight, spiral, or Zerol. And as with the rack and pinion gears, there are different types of bevel gears.

China manufacturer Varitron Cyclo Drive Gear Box Speed Reducer Motor CZPT Harmonic Gear worm and wheel gear
editor by CX 2023-04-24

China OEM Metal Parts Manufacturer Excavator Gear Worm Gear gear box

Merchandise Description

one, production engineering: forging ,stamping ,machining
two,Content: stainless metal ,carbon steel ,
three, one method, higher precision, minor surface area roughness,
four, customized, we generate the parts in accordance to drawings or samples,
5, we will examine the parts strictly and supply materials and inspection report.

Packing and Shipping
1. Common: crate
2. Shipping: As for every deal shipping and delivery on time
three. Transport: As for every client ask for.

Our advantages
one.We can management the products to satisfy your stringent prerequisite.
2. Distinct types of finish available, like anodized, electrical power coating, painting, sharpening, electrophoresis, plating. And many others.
3. Distinct dimensions according to the needs
four. Can offer numerous dimensions and packing in accordance to particular demands
five. We supply the engineer session to your design for creation advancement and expense conserving

Our Support:
1.Your inquiry related to our merchandise or costs will be replied in 24 several hours.
2.Person method in accordance to customers’ particular drawing requests.
3.Producer with big capacity, guarantees the quickly manufacturing cycle following
confirming the buy.
4.Protection of product sales region and personal data for all of our buyers.

US $5
/ kg
| 100 kg

(Min. Order)

###

Condition:	New
Certification:	ISO9000
Standard:	ASTM
Customized:	Customized
Material:	Alloy
Application:	Metal Processing Machinery Parts, Metal forging Machinery

###

Samples:	US$ 10/Piece 1 Piece(Min.Order) \| Request Sample

###

Customization:	Available \| Customized Request

US $5
/ kg
| 100 kg

(Min. Order)

###

Condition:	New
Certification:	ISO9000
Standard:	ASTM
Customized:	Customized
Material:	Alloy
Application:	Metal Processing Machinery Parts, Metal forging Machinery

###

Samples:	US$ 10/Piece 1 Piece(Min.Order) \| Request Sample

###

Customization:	Available \| Customized Request

How to Compare Different Types of Spur Gears

When comparing different types of spur gears, there are several important considerations to take into account. The main considerations include the following: Common applications, Pitch diameter, and Addendum circle. Here we will look at each of these factors in more detail. This article will help you understand what each type of spur gear can do for you. Whether you’re looking to power an electric motor or a construction machine, the right gear for the job will make the job easier and save you money in the long run.
Gear

Common applications

Among its many applications, a spur gear is widely used in airplanes, trains, and bicycles. It is also used in ball mills and crushers. Its high speed-low torque capabilities make it ideal for a variety of applications, including industrial machines. The following are some of the common uses for spur gears. Listed below are some of the most common types. While spur gears are generally quiet, they do have their limitations.
A spur gear transmission can be external or auxiliary. These units are supported by front and rear casings. They transmit drive to the accessory units, which in turn move the machine. The drive speed is typically between 5000 and 6000 rpm or 20,000 rpm for centrifugal breathers. For this reason, spur gears are typically used in large machinery. To learn more about spur gears, watch the following video.
The pitch diameter and diametral pitch of spur gears are important parameters. A diametral pitch, or ratio of teeth to pitch diameter, is important in determining the center distance between two spur gears. The center distance between two spur gears is calculated by adding the radius of each pitch circle. The addendum, or tooth profile, is the height by which a tooth projects above the pitch circle. Besides pitch, the center distance between two spur gears is measured in terms of the distance between their centers.
Another important feature of a spur gear is its low speed capability. It can produce great power even at low speeds. However, if noise control is not a priority, a helical gear is preferable. Helical gears, on the other hand, have teeth arranged in the opposite direction of the axis, making them quieter. However, when considering the noise level, a helical gear will work better in low-speed situations.

Construction

The construction of spur gear begins with the cutting of the gear blank. The gear blank is made of a pie-shaped billet and can vary in size, shape, and weight. The cutting process requires the use of dies to create the correct gear geometry. The gear blank is then fed slowly into the screw machine until it has the desired shape and size. A steel gear blank, called a spur gear billet, is used in the manufacturing process.
A spur gear consists of two parts: a centre bore and a pilot hole. The addendum is the circle that runs along the outermost points of a spur gear’s teeth. The root diameter is the diameter at the base of the tooth space. The plane tangent to the pitch surface is called the pressure angle. The total diameter of a spur gear is equal to the addendum plus the dedendum.
The pitch circle is a circle formed by a series of teeth and a diametrical division of each tooth. The pitch circle defines the distance between two meshed gears. The center distance is the distance between the gears. The pitch circle diameter is a crucial factor in determining center distances between two mating spur gears. The center distance is calculated by adding the radius of each gear’s pitch circle. The dedendum is the height of a tooth above the pitch circle.
Other considerations in the design process include the material used for construction, surface treatments, and number of teeth. In some cases, a standard off-the-shelf gear is the most appropriate choice. It will meet your application needs and be a cheaper alternative. The gear will not last for long if it is not lubricated properly. There are a number of different ways to lubricate a spur gear, including hydrodynamic journal bearings and self-contained gears.
Gear

Addendum circle

The pitch diameter and addendum circle are two important dimensions of a spur gear. These diameters are the overall diameter of the gear and the pitch circle is the circle centered around the root of the gear’s tooth spaces. The addendum factor is a function of the pitch circle and the addendum value, which is the radial distance between the top of the gear tooth and the pitch circle of the mating gear.
The pitch surface is the right-hand side of the pitch circle, while the root circle defines the space between the two gear tooth sides. The dedendum is the distance between the top of the gear tooth and the pitch circle, and the pitch diameter and addendum circle are the two radial distances between these two circles. The difference between the pitch surface and the addendum circle is known as the clearance.
The number of teeth in the spur gear must not be less than 16 when the pressure angle is twenty degrees. However, a gear with 16 teeth can still be used if its strength and contact ratio are within design limits. In addition, undercutting can be prevented by profile shifting and addendum modification. However, it is also possible to reduce the addendum length through the use of a positive correction. However, it is important to note that undercutting can happen in spur gears with a negative addendum circle.
Another important aspect of a spur gear is its meshing. Because of this, a standard spur gear will have a meshing reference circle called a Pitch Circle. The center distance, on the other hand, is the distance between the center shafts of the two gears. It is important to understand the basic terminology involved with the gear system before beginning a calculation. Despite this, it is essential to remember that it is possible to make a spur gear mesh using the same reference circle.

Pitch diameter

To determine the pitch diameter of a spur gear, the type of drive, the type of driver, and the type of driven machine should be specified. The proposed diametral pitch value is also defined. The smaller the pitch diameter, the less contact stress on the pinion and the longer the service life. Spur gears are made using simpler processes than other types of gears. The pitch diameter of a spur gear is important because it determines its pressure angle, the working depth, and the whole depth.
The ratio of the pitch diameter and the number of teeth is called the DIAMETRAL PITCH. The teeth are measured in the axial plane. The FILLET RADIUS is the curve that forms at the base of the gear tooth. The FULL DEPTH TEETH are the ones with the working depth equal to 2.000 divided by the normal diametral pitch. The hub diameter is the outside diameter of the hub. The hub projection is the distance the hub extends beyond the gear face.
A metric spur gear is typically specified with a Diametral Pitch. This is the number of teeth per inch of the pitch circle diameter. It is generally measured in inverse inches. The normal plane intersects the tooth surface at the point where the pitch is specified. In a helical gear, this line is perpendicular to the pitch cylinder. In addition, the pitch cylinder is normally normal to the helix on the outside.
The pitch diameter of a spur gear is typically specified in millimeters or inches. A keyway is a machined groove on the shaft that fits the key into the shaft’s keyway. In the normal plane, the pitch is specified in inches. Involute pitch, or diametral pitch, is the ratio of teeth per inch of diameter. While this may seem complicated, it’s an important measurement to understand the pitch of a spur gear.
gear

Material

The main advantage of a spur gear is its ability to reduce the bending stress at the tooth no matter the load. A typical spur gear has a face width of 20 mm and will fail when subjected to 3000 N. This is far more than the yield strength of the material. Here is a look at the material properties of a spur gear. Its strength depends on its material properties. To find out what spur gear material best suits your machine, follow the following steps.
The most common material used for spur gears is steel. There are different kinds of steel, including ductile iron and stainless steel. S45C steel is the most common steel and has a 0.45% carbon content. This type of steel is easily obtainable and is used for the production of helical, spur, and worm gears. Its corrosion resistance makes it a popular material for spur gears. Here are some advantages and disadvantages of steel.
A spur gear is made of metal, plastic, or a combination of these materials. The main advantage of metal spur gears is their strength to weight ratio. It is about one third lighter than steel and resists corrosion. While aluminum is more expensive than steel and stainless steel, it is also easier to machine. Its design makes it easy to customize for the application. Its versatility allows it to be used in virtually every application. So, if you have a specific need, you can easily find a spur gear that fits your needs.
The design of a spur gear greatly influences its performance. Therefore, it is vital to choose the right material and measure the exact dimensions. Apart from being important for performance, dimensional measurements are also important for quality and reliability. Hence, it is essential for professionals in the industry to be familiar with the terms used to describe the materials and parts of a gear. In addition to these, it is essential to have a good understanding of the material and the dimensional measurements of a gear to ensure that production and purchase orders are accurate.

China OEM Metal Parts Manufacturer Excavator Gear Worm Gear gear box
editor by czh 2023-01-25

K Series Small Fl manufacturer ange Hollow Shaft Mounted Spiral Bevel Gea sales r Reducer Gear Box

Product Description

Our K series CZPT cal-bevel gear motors are an excellent choice for many applications that require energy-efficient compact drives. Due to low maintenance, it will reduce your daily operating costs

•Model Number:K/KA/KAD/KAF/KF
•Ratio:4-17500
•Rated CZPT :0.12-200KW
•Output Torque:Top to 50000N.m
•Input CZPT : CZPT to 3000rpm
•Output CZPT : 0.08-350r/min
•Arrangement:Bevel / Miter-Helical.

1. K series CZPT cal gear-bevel gear reducer motor has the characteristics of small size and large transmission torque
2. Designed and manufactured on the basis of module combination system, there are extremely many motor combinations, installation types and structural schemes, and the transmission ratio is fine, which meets different working conditions and realizes mechatronics.
3. CZPT transmission efficiency, low energy consumption and superior performance.
4. CZPT -rigidity cast iron box with ribs, gears are made of high-quality alloy steel, the surface is carburized and quenched and hardened, and the grinding teeth are finely processed, the transmission is stable, the noise is low, the bearing capacity is large, the temperature rise is low, and the life is CZPT .
5. This series of reducers do not carry oil before leaving the factory, it is recommended to add N220 medium extreme pressure industrial gear oil in GB3141 before use.

Size:27,37,47,57,67,77,87,97,107,137,147,167
Power range:0.18KW-200KW
Ratio: 3.4- 280.6
Output CZPT :0.11-440rpm
Output torque: 105-27200nm
Input speed:750rpm,1000rpm,1500rpm,1800rpm.
Output shaft diameter:25mm-120mm
Reduction stage: two stages, three stages,
Mounting way: foot mounted, shaft mounted, flange mounted
Output way: Solid shaft
Weight:6.2KGS-770KGS
Ambient temperature:-15.00 [°C] ~ +50 [°C]
Direction of rotation of gear output shaft: CW rotation or CCW
Corrosion protection: Conservation acc. to Norm
Coating system: Standard coating, finishing coat, for all climatic zones
Color: Blue or any color you need

1. CZPT ly Standard Modular Designed: The products are easily connected with and driven by different types of motors and CZPT input CZPT . The same type geared motor can be adapted to optioned CZPT s of motors. It is therefore easy to realize different solution for varied requirements.
2. Ratio: Featured many closely divided ratios and wide range of them. Very big final ratios can be obtained through combined unites to reach extremely low output speeds.
3. Mounting Arrangement: No strict limitation to the mounting arrangement.
4. CZPT CZPT , Compact Dimension: Housings are made of high strength cast iron. Gears and shaft gears are finished with gas carburizing process and precise grounding to sequentially get high loading capacity of per certain volume.
5. CZPT Service Life: Under the condition of accurately selecting type size and the normal maintenance and use, main components (expect those easily-disabled parts) can last as CZPT as up to more than 25,000 hours. Easily-disabled parts include lubricating oil, oil seals, and bearings.
6. Low Noise: All key components are finished by precisely machining, accurate assembly, and finally tested, and therefore, fairly low noise is reached.
7. CZPT Efficiency: The efficiency of gear unit can reach 95%, The efficiency of CZPT unit can reach 89%.
8. Large radial loading ability.
9. Axial load ability of up to 5% of radial load.

1. Gears are made of high-grade alloy steel after carburizing, quenching, and finishing processes.
2. The center distance and other major both by optimizing design, the main parts and components have good compatibility.
3. The advantages, light weight, high precision, large capacity, high efficiency, high reliability, CZPT service life, smooth operation and low noise.
4. Usually the gear speed reducers are lubricated by the oil sump and cooled naturally.
This series speed reducer can be wide applied for mining machinery, metallurgical industry, transportation, cement industry, building industry, chemical industry, textile industry, light industry and CZPT industry, etc.

Model:	K Series – Foot-mounted, solid shaft output KAB Series – Foot-mounted, hollow shaft output KA Series – Keyed hollow shaft output KF Series – B5 Flange-mounted, solid shaft output KAF Series – B5 Flange-mounted, hollow shaft output KAZ Series – B14 Flange-mounted, hollow shaft output KAT Series – Hollow shaft output, torque arm KH, KHB, KHF, KHZ Series – Hollow shaft output, shrink disk KV, KVB, KVF, KVZ Series – Hollow shaft output, splined hollow shaft K(KA, KF, KAF, KAB, KAZ)S Series – Solid shaft input
Housing	Cast Iron
Input CZPT	0.12-200kw
Output torque	10-61900N.m
Output speed	0.08-261rpm
Bearing	C&U CZPT ,NSK,SKF or on request
Ratio	5.36~178.37
Installation Form	Foot, Flange, Shaft Mounted
Seal	SKF,CTY,CFW or on request
Gears	Helical-bevel Gears
Input Configurations	Equipped with CZPT ctric CZPT s Solid Shaft Input IEC-normalized CZPT Flange
Applicable CZPT s	Single Phase AC CZPT , Three Phase AC CZPT Brake CZPT s Inverter CZPT s Multi-speed CZPT s Explosion-proof CZPT Roller CZPT
Output Configurations	Solid Shaft Output Hollow Shaft Output
nstallation	Foot-mounted B5 Flange-mounted B14 Flange-mounted Shaft-mounted
Lubrication	Oil-bath and Splash CZPT
Model:	K Series – Foot-mounted, solid shaft output KAB Series – Foot-mounted, hollow shaft output KA Series – Keyed hollow shaft output KF Series – B5 Flange-mounted, solid shaft output KAF Series – B5 Flange-mounted, hollow shaft output KAZ Series – B14 Flange-mounted, hollow shaft output KAT Series – Hollow shaft output, torque arm KH, KHB, KHF, KHZ Series – Hollow shaft output, shrink disk KV, KVB, KVF, KVZ Series – Hollow shaft output, splined hollow shaft K(KA, KF, KAF, KAB, KAZ)S Series – Solid shaft input
Housing	Cast Iron
Input CZPT	0.12-200kw
Output torque	10-61900N.m
Output speed	0.08-261rpm
Bearing	C&U CZPT ,NSK,SKF or on request
Ratio	5.36~178.37
Installation Form	Foot, Flange, Shaft Mounted
Seal	SKF,CTY,CFW or on request
Gears	Helical-bevel Gears
Input Configurations	Equipped with CZPT ctric CZPT s Solid Shaft Input IEC-normalized CZPT Flange
Applicable CZPT s	Single Phase AC CZPT , Three Phase AC CZPT Brake CZPT s Inverter CZPT s Multi-speed CZPT s Explosion-proof CZPT Roller CZPT
Output Configurations	Solid Shaft Output Hollow Shaft Output
nstallation	Foot-mounted B5 Flange-mounted B14 Flange-mounted Shaft-mounted
Lubrication	Oil-bath and Splash CZPT

Best Light Duty 90 Degree Gearbox, manufacturer Small Square Custom Box 90 Degree Drive Shaft, Gear Transmission Miniature Price

Product Description

We are professional best light duty 90 degree gearbox,small square box 90 degree drive shaft, gear transmission miniature manufacturers and suppliers from CZPT . All light duty 90 degree gearbox,small square box 90 degree drive shaft, gear transmission miniature will be tested and inspection reports before products shipment.

JTP Series Cubic Bevel Gearbox

Jacton JTP series cubic bevel gearbox is also known as cubic right angle miter gearbox, cubic 90 degree bevel gearbox, cubic miter bevel CZPT , or cubic spiral bevel gear reducers. JTP series cubic bevel gearbox is a right-angle shaft type CZPT of spiral bevel gears for general applications with high transmission capacity, high performance and high efficiency. 1:1, 1.5:1, 2:1, 3:1, 4:1 and 5:1 gear ratios as standard. 2 way(one input one output), 3 way(one input two output, or two input one output), 4 way(two input two output) drive shafts as standard. Solid shaft as standard, CZPT ize hollow shaft or motor flange to bolt an IEC motor flange. CZPT imum torque 1299N.m. CZPT imum input and output speed 1450RPM. There are 8 models: JTP65 mini cubic bevel gearbox, JTP90 cubic bevel gearbox, JTP110 cubic bevel gearbox, JTP140 cubic bevel gearbox, JTP170 cubic bevel gearbox, JTP210 cubic bevel gearbox, JTP240 cubic bevel gearbox and JTP280 cubic bevel gearbox.

JTP65 Mini Cubic Bevel Gearbox 1. bevel gear ratio 1:1 2. solid drive shafts diameter12mm 3. solid input and output shaft shafts 4. 2 way, 3 way, 4 way gearbox 5. input CZPT maximum 1.8Kw 6. drive torque maximum 13.5Nm 7. maximum input 1500rpm	JTP90 Cubic Bevel Gearbox 1. gear ratios 1:1, 1.5:1, 2:1, 3:1, 4:1 5:1 2. cubic, 6 mount positions, CZPT mount 3. solid shaft, hollow shaft, motor flange 4. 2 way, 3 way, 4 way gearbox 5. input CZPT maximum 6Kw 6. drive torque maximum 43.3Nm 7. maximum input 1500rpm	JTP110 Cubic Bevel Gearbox 1. gear ratios 1:1, 1.5:1, 2:1, 3:1, 4:1 5:1 2. cubic, 6 mount positions, CZPT mount 3. solid shaft, hollow shaft, motor flange 4. 2 way, 3 way, 4 way gearbox 5. input CZPT maximum 11Kw 6. drive torque maximum 78.3Nm 7. maximum input 1500rpm
JTP140 Cubic Bevel Gearbox 1. gear ratios 1:1, 1.5:1, 2:1, 3:1, 4:1 5:1 2. cubic, 6 mount positions, CZPT mount 3. solid shaft, hollow shaft, motor flange 4. 2 way, 3 way, 4 way gearbox 5. input CZPT maximum 23. 9Kw 6. drive torque maximum 170Nm 7. maximum input 1500rpm	JTP170 Cubic Bevel Gearbox 1. gear ratios 1:1, 1.5:1, 2:1, 3:1, 4:1 5:1 2. cubic, 6 mount positions, CZPT mount 3. solid shaft, hollow shaft, motor flange 4. 2 way, 3 way, 4 way gearbox 5. input CZPT maximum 39.2Kw 6. drive torque maximum 290Nm 7. maximum input 1500rpm	JTP210 Cubic Bevel Gearbox 1. gear ratios 1:1, 1.5:1, 2:1, 3:1, 4:1 5:1 2. cubic, 6 mount positions, CZPT mount 3. solid shaft, hollow shaft, motor flange 4. 2 way, 3 way, 4 way gearbox 5. input CZPT maximum 67.5Kw 6. drive torque maximum 520Nm 7. maximum input 1500rpm
JTP240 Cubic Bevel Gearbox 1. gear ratios 1:1, 1.5:1, 2:1, 3:1, 4:1 5:1 2. cubic, 6 mount positions, CZPT mount 3. solid shaft, hollow shaft, motor flange 4. 2 way, 3 way, 4 way gearbox 5. input CZPT maximum 90.5Kw 6. drive torque maximum 694Nm 7. maximum input 1500rpm	JTP280 Cubic Bevel Gearbox 1. gear ratios 1:1, 1.5:1, 2:1, 3:1, 4:1 5:1 2. cubic, 6 mount positions, CZPT mount 3. solid shaft, hollow shaft, motor flange 4. 2 way, 3 way, 4 way gearbox 5. input CZPT maximum 156Kw 6. drive torque maximum 1199Nm 7. maximum input 1500rpm

JT Series Spiral Bevel Gearbox

Jacton JT series spiral bevel gearbox is also known as miter bevel CZPT , spiral bevel gear reducers, right angle miter gearbox, or 90 degree bevel gearbox. JT series spiral bevel gearbox is a right-angle shaft type CZPT of spiral bevel gears for general applications with high transmission capacity, high performance and high efficiency. 1:1, 1.5:1, 2:1, 2.5:1, 3:1, 4:1 and 5:1 gear ratios as standard. 2 way(one input one output), 3 way(one input two output, or two input one output), 4 way(two input two output) drive shafts as standard. Solid shaft as standard, CZPT ize hollow shaft or motor flange to bolt an IEC motor flange. CZPT imum torque 5713N.m. CZPT imum input and output speed 1450RPM. There are 10 models: JT15 spiral bevel gearbox, JT19 spiral bevel gearbox, JT25 spiral bevel gearbox, JT32 spiral bevel gearbox, JT40 spiral bevel gearbox, JT45 spiral bevel gearbox, JT50 spiral bevel gearbox, JT60 spiral bevel gearbox, JT72 spiral bevel gearbox, JT85 spiral bevel gearbox.

JT15 Spiral Bevel Gearbox 1. spiral teeth miter bevel gears 2. 90 degree right angle drives 3. bevel gear ratios 1:1, 2:1 4. 2 way, 3 way, 4 way gearboxes 5. input CZPT maximum 1.79Kw 6. drive torque maximum 28Nm 7. drive shaft diameter 15mm	JT19 Spiral Bevel Gearbox 1. spiral teeth miter bevel gears 2. 90 degree right angle drives 3. bevel gear ratios 1:1, 2:1 4. 2 way, 3 way, 4 way gearboxes 5. input CZPT maximum 4.94Kw 6. drive torque maximum 48.5Nm 7. drive shaft diameter 19mm	JT25 Spiral Bevel Gearbox 1. spiral teeth miter bevel gears 2. 90 degree right angle drives 3. ratios 1:1, 1.5:1, 2:1, 2.5:1, 3:1, 4:1, 5:1 4. 2 way, 3 way, 4 way gearboxes 5. input CZPT maximum 14.9Kw 6. drive torque maximum 132Nm 7. drive shaft diameter 25mm
JT32 Spiral Bevel Gearbox 1. spiral teeth miter bevel gears 2. 90 degree right angle drives 3. ratios 1:1, 1.5:1, 2:1, 2.5:1, 3:1, 4:1, 5:1 4. 2 way, 3 way, 4 way gearboxes 5. input CZPT maximum 22Kw 6. drive torque maximum 214Nm 7. drive shaft diameter 32mm	JT40 Spiral Bevel Gearbox 1. spiral teeth miter bevel gears 2. 90 degree right angle drives 3. ratios 1:1, 1.5:1, 2:1, 2.5:1, 3:1, 4:1, 5:1 4. 2 way, 3 way, 4 way gearboxes 5. input CZPT maximum 45.6Kw 6. drive torque maximum 361Nm 7. drive shaft diameter 40mm	JT45 Spiral Bevel Gearbox 1. spiral teeth miter bevel gears 2. 90 degree right angle drives 3. ratios 1:1, 1.5:1, 2:1, 2.5:1, 3:1, 4:1, 5:1 4. 2 way, 3 way, 4 way gearboxes 5. input CZPT maximum 65. 3Kw 6. drive torque maximum 561Nm 7. drive shaft diameter 45mm
JT50 Spiral Bevel Gearbox 1. spiral teeth miter bevel gears 2. 90 degree right angle drives 3. ratios 1:1, 1.5:1, 2:1, 2.5:1, 3:1, 4:1, 5:1 4. 2 way, 3 way, 4 way gearboxes 5. input CZPT maximum 96Kw 6. drive torque maximum 919Nm 7. drive shaft diameter 50mm	JT60 Spiral Bevel Gearbox 1. spiral teeth miter bevel gears 2. 90 degree right angle drives 3. ratios 1:1, 2:1, 3:1, 4:1, 5:1 4. 2 way, 3 way, 4 way gearboxes 5. input CZPT maximum 163Kw 6. drive torque maximum 1940Nm 7. drive shaft diameter 60mm	JT72 Spiral Bevel Gearbox 1. spiral teeth miter bevel gears 2. 90 degree right angle drives 3. ratios 1:1, 2:1, 3:1, 4:1, 5:1 4. 2 way, 3 way, 4 way gearboxes 5. input CZPT maximum 234Kw 6. drive torque maximum 3205Nm 7. drive shaft diameter 72mm
JT85 Spiral Bevel Gearbox 1. spiral teeth miter bevel gears 2. 90 degree right angle drives 3. ratios 1:1, 2:1, 3:1, 4:1, 5:1 4. 2 way, 3 way, 4 way gearboxes 5. input CZPT maximum 335Kw 6. drive torque maximum 5713Nm 7. drive shaft diameter 85mm

JTA Series CZPT Bevel Gearbox

Jacton JTA series aluminum bevel gearbox is also known as aluminum miter bevel CZPT , aluminum spiral bevel gearbox, or aluminum right angle bevel gearboxes. JTA series aluminum bevel gearboxes are compact and feature efficient, quiet operating spiral bevel gears. Available in 1:1 and 2:1 speed ratios with CZPT two or three-way versions. CZPT imum torque 46.8N.m. CZPT imum input and output speed 1450RPM. There are 4 models: JTA10 aluminium bevel gearbox, JTA15 aluminium bevel gearbox, JTA20 aluminium bevel gearbox, JTA24 aluminium bevel gearbox.

JTA10 CZPT Bevel Gearbox 1. die-casting aluminum housing 2. lightweight, small, corrosion resistance 3. spiral teeth miter bevel gears 4. 90 degree right angle drives 5. bevel gear ratios 1:1 6. 2 way, 3 way gearboxes 7. input CZPT maximum 0.31Kw 8. drive torque maximum 3.82Nm 9. maximum input 1500rpm	JTA15 CZPT Bevel Gearbox 1. die-casting aluminum housing 2. lightweight, small, corrosion resistance 3. spiral teeth miter bevel gears 4. 90 degree right angle drives 5. bevel gear ratios 1:1, 2:1 6. 2 way, 3 way gearboxes 7. input CZPT maximum 1.11Kw 8. drive torque maximum 7.64Nm 9. maximum input 1500rpm	JTA20 CZPT Bevel Gearbox 1. die-casting aluminum housing 2. lightweight, small, corrosion resistance 3. spiral teeth miter bevel gears 4. 90 degree right angle drives 5. bevel gear ratios 1:1, 2:1 6. 2 way, 3 way gearboxes 7. input CZPT maximum 1.92Kw 8. drive torque maximum 18.15Nm 9. maximum input 1500rpm
JTA24 CZPT Bevel Gearbox 1. die-casting aluminum housing 2. lightweight, small, corrosion resistance 3. spiral teeth miter bevel gears 4. 90 degree right angle drives 5. bevel gear ratios 1:1, 2:1 6. 2 way, 3 way gearboxes 7. input CZPT maximum 4.94Kw 8. drive torque maximum 47.75Nm 9. maximum input 1500rpm

Packing Pictures & Shipping
Shipping:
1. CZPT freight: seaport to seaport, price terms CIF, FOB, EXW, CFR etc.
2. Air freight: airport to airport, price terms EXW, CRF etc.
3. Air Express: DHL, FEDEX, UPS, TNT.
Packaging:
Strong Exporting Plywood Cases (International Exporting Standard CZPT Material with Free Fumigation)

Our Advantages
1. CZPT standard materials for All CZPT brand products. We insist on choosing brand suppliers to supply the high quality raw materials to control the producing process. Optimization constantly the production processes, inspecting in each link and managing production site.
2. 100% quality assured with double quality inspections. The quality inspection by quality inspectors from processing to finished products as the first time. Before packing, the corresponding sales engineers must inspect the orders following the paper drawings, order quantities and special markings in the invoice or sales contracts as the CZPT time.
3. 100% safety transportation. Packing with strong standard export plywood cases materials (free fumigation), inner packing with epe foams to prevent products swaying and outer packing with iron sheets and CZPT eners to CZPT en the packages.
4. Internationl sales engineers have professional knowledge and skills on CZPT standard products and service. They have enough ability to solve the basic technical problem immediately whatever by phone, online chat, face to face communications.
5. All the standard products with 2D CAD Drawings (PDF, DWG and DXF formats), and 3D CAD Models (STEP, STP, MODEL, IGS, PRT and CATParT formats).
6. CZPT design CZPT , CZPT service CZPT , Free CZPT advice, Free quotes CZPT and CZPT er label CZPT .
7. Inspection equipments include motor with inverter drive system, height adjustmemt motorized lifting system, coordinate measuring machines, outside micrometers, inside micrometers, depth calipers, vernier calipers, digital calipers, hardness testers, digital noise meters, industrial infrared thermometers, digital speed measuring instruments, digital multimeters, and high precision clamp digital ammeter etc.
8. Processing with modern CZPT d machines such as CNC gear hobbing machines, CNC flank grinding machines, CNC cylindrical grinding machines, multi-axis CNC milling machines, CNC lathes and others equipments.

Finished Projects
1. Theatrical solutions stage and orchestra platform lifts projects. CZPT ers are from France, Australia, Netherlands, CZPT CZPT dom, Spain and Canada.
2. CZPT electric CZPT station projects and water conservancy projects. CZPT ers are from Vietnam, Australia, Malaysia, Russian Federation, Nepal, Pakistan, Belgium, CZPT States and CZPT CZPT dom.
3. Aircraft maintenance platforms and docking systems projects. CZPT ers are from Pakistan, Singapore and CZPT Arab Emirates.
4. Solar panel tracking system projects. CZPT ers are from Spain, India and Canada.
5. Bolted steel storage tanks and silos lifting solutions. CZPT ers are from South Africa, CZPT States, Mexico, Russian Federation, Brazil and Vietnam.
6. Dish antenna elevation and azimuth positioning projects. CZPT ers are from Singapore, Malaysia and CZPT States.
7. Railway wagon projects. CZPT ers are from South Africa.
8. Beverage can production lines. CZPT ers are from Netherlands, CZPT States, Thailand and Indonesia.
9. Steel factories production lines. CZPT ers are from Iran, CZPT States and Turkey.
10. Continuous PU sandwich panel production lines. CZPT ers are from Thailand and CZPT CZPT dom.

Our Products List
1. Manual screw jacks, CZPT ctric screw jacks.
2. CZPT Jacks Series: JT series acme screw jacks, JTC series cubic screw jacks, JTW series machine screw jacks, JTM series worm screw jacks, JTB series ball screw jacks, JTD series cubic ball screw jacks, JSS series stainless steel screw jacks, JTS series bevel gear screw jacks, CZPT -standard series screw jacks.
3. Bevel Gearboxes Series: JT series bevel gearboxes, JTP series cubic bevel gearboxes, JTA series aluminum bevel gearboxes.
4. CZPT ing Systems and Systems Accessories: two-jacks systems, three-jacks systems, four-jacks systems, six-jacks systems, eight-jacks systems.. Accessories cover couplings, CZPT joints, cardan shafts, connecting shafts, electric motors, geared motors and reducers, hand wheel with crank handles, pillow block bearings, flange block bearings, rod end bearings, stop nuts, limit switches, safety nut, travel nuts, linear shafts and bearings, linear guides and bearings, telescopic spring covers, bellows boot, protective tube, trunnion adapter plates, trunnion mounting brackets, motor flanges, rotary encoders, potentiometers, frequency inverters and position indicators etc.
5. CZPT Actuators Series: Parallel linear actuators with 3-phase AC motors, Inline linear actuators with 3-phase AC motors,
6. Gearmotors and Reducers Series: CZPT cal gearmotors R series, CZPT cal bevel gearmotors K series, parallel shaft CZPT cal gearmotors F series, CZPT cal CZPT motors S series, small AC gear motor series and CZPT motor reducer series.

Our CZPT ers’ Countries
1. CZPT ican Countries: CZPT States, Mexico, Canada, Chile, Xihu (West CZPT ) Dis.via, Brazil, Colombia, Dominican Republic, Honduras, Costa Rica, Panama, Puerto Rico, Jamaica, Trinidad and Tobago, Aruba, Argentina, Peru, Venezuela.
2. CZPT pean Countries: Russia, Germany, Turkey, France, CZPT CZPT dom, CZPT , Spain, Ukraine, Poland, CZPT ia, Netherlands, Belgium, Greece, Czech Republic, Portugal, Sweden, Hungary, Belarus, Austria, Switzerland, Bulgaria, Denmark, Finland, Slovakia, Norway, Ireland, Croatia, Georgia, Armenia, CZPT uania, Slovenia, Estonia, Cyprus, Luxembourg, CZPT land.
3. Asian Countries: Malaysia, Indonesia, Singapore, Pakistan, Philippines, Vietnam, CZPT Arab Emirates, Thailand, Saudi Arabia, Iran, Turkey, India, Nepal, Yemen, ZheJiang , Sri Lanka, Israel, Jordan, Kuwait, Qatar.
4. CZPT ian Countries: Australia, New Zealand, Fiji.
5. African Countries: South Africa, Egypt, Ethiopia, Nigeria, Kenya, Tanzania.

Contact Information
HangZhou CZPT Industry Co.,Ltd (VAT No.: 9144190007026567X3, registered Capital 500000CNY) is a leading manufacturer and supplier in CZPT for screw jacks (mechanical actuators), bevel gearboxes, lifting systems, linear actuators, gearmotors and speed reducers, and others linear motion and CZPT transmission products. We are Alibaba, Made-In-China and SGS (Serial NO.: QIP-ASI192186) audited manufacturer and supplier. We also have a strict quality system, with senior engineers, experienced skilled workers and practiced sales teams, we consistently provide the high quality equipments to meet the CZPT ers electro-mechanical actuation, lifting and positioning needs. CZPT Industry guarantees quality, reliability, performance and value for today’s demanding industrial applications.
Website 1: http://screw-jacks.en.made-in-china.com
Website 2: https://screw-jacks.en.made-in-china.com

Miter Gear B manufacturer ox or Right Angle Gear Custom Box of Spiral Bevel Gears with High Efficiency High Power Rating. Use in Transmission Truing and Torque Linear Stretch.

Product Description

Miter Gear Box or Right angle CZPT of spiral bevel gears with high efficiency high CZPT rating. Miter Gear Box extended use in transmission truing and torque linear stretch. Installed in multi-surfaces form one shafts to four shafts or flange type. bevel gearboxes will be used if the operating direction is to be displaced by 90°. Thus, the output torque can be increased many times. Low-noise and smooth operation, Suitable for manual and electrical operation, CZPT quality corrosion protection, CZPT steel input shaft. CZPT are used exclusively to transmit rotary motion between intersecting shafts. Through commonly seen in right angle drives, bevel gears can be cut to drive any angle.

How Does A Compact Bevel Gearbox Work?

Compact Cubic Gearboxes Videos For CZPT ers Orders

* Malaysia CZPT ers bevel 90 degree gearbox 1:1 ratio at 300rpm 600rpm 900rpm 1200rpm 1500rpm speed Video:
https://screw-jacks.en.made-in-china.com
* Germany CZPT er spiral-bevel gears 1:1 ratio right angle gearbox with four-way(three output shafts) Video:
https://screw-jacks.en.made-in-china.com
* Nigeria client 1:1 90° right angle heavy duty CZPT , heavy spiral bevel CZPT 3 shafts Video:
https://screw-jacks.en.made-in-china.com
* Thailand client bevel CZPT es 3:1 ratio JTP140 90 degree transmission gearbox 3 to 1 Video:
https://screw-jacks.en.made-in-china.com
* Malaysia CZPT er four 10-ton jacks and four JTP140 gearboxes for motorized CZPT screw lift table Video:
https://screw-jacks.en.made-in-china.com
* Australia client screw jack self locking system with inverted 2.5 ton screw jacks and JTP90 gearboxes Video:
https://screw-jacks.en.made-in-china.com
* France CZPT er four shaft gearbox 1:1 ratio right angle gearbox four way 22mm 90 degree gear drives Video:
https://screw-jacks.en.made-in-china.com
* Indonesia CZPT er reduction gearbox 2:1 ratio right angle spiral bevel gear drive Video:
https://screw-jacks.en.made-in-china.com
* USA CZPT er high speed right angle drive 1:1 ratio 90 degree high speed CZPT es Video:
https://screw-jacks.en.made-in-china.com
* Mexico client JTP65 miniature spiral bevel gearbox 1:1 ratio three way testing Video:
https://screw-jacks.en.made-in-china.com
* One input two output CZPT es JTP90 bevel gears 90 CZPT dual output Video:
https://screw-jacks.en.made-in-china.com
* Brazil client JTP110 Two-way Three-way Right CZPT le Gearbox 1:1 Ratio Video:
https://screw-jacks.en.made-in-china.com
* India Faridabad CZPT ers JTP110 angel gearbox drive 1:1 22mm shaft 90 degree angle CZPT es Video:
https://screw-jacks.en.made-in-china.com
* Thailand client 90 degree gear drive box,right ange 1:1 ratio gear reducer Video:
https://screw-jacks.en.made-in-china.com
* Canada CZPT er acme screw jack 2 ton travel nut with JTP90 right angle gearbox and safety coupling Video:
https://screw-jacks.en.made-in-china.com
* Slovenia client 90 degree gearbox 1:1 ratio, right angle gearbox 1 to 1 ratio Video:
https://screw-jacks.en.made-in-china.com
* Brazil client bevel 90 degree gearbox 1:1 test video before shipment Video:
https://screw-jacks.en.made-in-china.com
* Turkey CZPT er top quality 25 kn 30×6 spindle rotating trapezoidal thread screw jacks 360mm Video:
https://screw-jacks.en.made-in-china.com
* USA CZPT er inverted screw jack 5 ton with 32mm shaft angle gearbox for 3 points lift system Video:
https://screw-jacks.en.made-in-china.com
* Malaysia CZPT er servo motor driven electric screw lift system with lifting systems accessories Video:
https://screw-jacks.en.made-in-china.com
* France CZPT er 5ton screw mechanism for manual table lift/worm gear hand crank raise lower platform Video:
https://screw-jacks.en.made-in-china.com
* Belgium Geel client miniature motorized platform lift,screw lift systems mini jacks gearboxes Video:
https://screw-jacks.en.made-in-china.com
* Queensland Australia client 6-jacks screw jacking systems with accessories for table lift system Video:
https://screw-jacks.en.made-in-china.com
* 100% safety packages & 100% standard exporting plywood cases materials videos:
https://screw-jacks.en.made-in-china.com

Shipment and Packing Pictures
Shipping:
1. CZPT freight: seaport to seaport, price terms CIF, FOB, EXW, CFR etc.
2. Air freight: airport to airport, price terms EXW, CRF etc.
3. Air courier: DHL, FEDEX, UPS, TNT door to door shipment, price terms DDU, CPT etc.
Packing:
100% standard exporting plywood cases.
Note: International Exporting Standard CZPT Material with Free Fumigation.

JACTON Advantages
1. CZPT standard materials for All CZPT TON brand products. We insist on choosing brand suppliers to supply the high quality raw materials to control the producing process. Optimization constantly the production processes, inspecting in each link and managing production site.
2. 100% quality assured with double quality inspections. The quality inspection by quality inspectors from processing to finished products as the first time. Before packing, the corresponding sales engineers must inspect the orders following the paper drawings, order quantities and special markings in the invoice or sales contracts as the CZPT time. After that, fill in the inspection report with signature and company stamp.
3. 100% safety transportation. Packing with strong standard export plywood cases materials (free fumigation), inner packing with epe foams to prevent products swaying and outer packing with iron sheets and CZPT eners to CZPT en the packages.
4. Internationl sales engineers have professional knowledge and skills on CZPT standard products and service. They have enough ability to solve the basic technical problem immediately whatever by phone, online chat, face to face communications.
5. All the standard products with 2D CAD Drawings (PDF, DWG and DXF formats), and 3D CAD Models (STEP, STP, MODEL, IGS, PRT and CATParT formats).
6. CZPT design CZPT , CZPT service CZPT , Free CZPT advice, Free quotes CZPT and CZPT er label CZPT .
7. Inspection equipments include motor with inverter drive system, height adjustmemt motorized lifting system, coordinate measuring machines, outside micrometers, inside micrometers, depth calipers, vernier calipers, digital calipers, hardness testers, digital noise meters, industrial infrared thermometers, digital speed measuring instruments, digital multimeters, and high precision clamp digital ammeter etc.
8. Processing with modern CZPT d machines such as CNC gear hobbing machines, CNC flank grinding machines, CNC cylindrical grinding machines, multi-axis CNC milling machines, CNC lathes and others equipments.

JACTON CZPT ers Areas(Countries)
1. American Countries: United States, Mexico, Canada, Chile, Xihu (West CZPT ) Dis.via, Brazil, Colombia, Dominican Republic, Honduras, Costa Rica, Panama, Puerto Rico, Jamaica, Trinidad and Tobago, Aruba, Argentina, Peru, Venezuela.
2. European Countries: Russia, Germany, Turkey, France, CZPT CZPT dom, CZPT , Spain, Ukraine, Poland, CZPT ia, Netherlands, Belgium, Greece, Czech Republic, Portugal, Sweden, Hungary, Belarus, Austria, Switzerland, Bulgaria, Denmark, Finland, Slovakia, Norway, Ireland, Croatia, Georgia, Armenia, CZPT uania, Slovenia, Estonia, Cyprus, Luxembourg, CZPT land.
3. Asian Countries: Malaysia, Indonesia, Singapore, Pakistan, Philippines, Vietnam, CZPT Arab Emirates, Thailand, Saudi Arabia, Iran, Turkey, India, Nepal, Yemen, ZheJiang , Sri Lanka, Israel, Jordan, Kuwait, Qatar.
4. Oceanian Countries: Australia, New Zealand, Fiji.
5. African Countries: South Africa, Egypt, Ethiopia, Nigeria, Kenya, Tanzania.

JACTON Products List
1. Manual CZPT Jacks, CZPT ctric CZPT Jacks.
2. Screw Jacks Series: JT series acme screw jacks, JTC series cubic screw jacks, JTW series machine screw jacks, JTM series worm screw jacks, JTB series ball screw jacks, JTD series cubic ball screw jacks, JSS series stainless steel screw jacks, JTS series bevel gear screw jacks, CZPT -standard series screw jacks.
3. Bevel Gearboxes Series: JT series bevel gearboxes, JTP series cubic bevel gearboxes, JTA series aluminum bevel gearboxes, JTH series hollow shaft bevel gearboxes, BSS series stainless steel bevel gearboxes.
4. Lifting Systems and Systems Accessories: two-jacks systems, three-jacks systems, four-jacks systems, six-jacks systems, eight-jacks systems. Accessories cover couplings, CZPT joints, cardan shafts, connecting shafts, electric motors, geared motors and reducers, hand wheel with crank handles, pillow block bearings, flange block bearings, rod end bearings, stop nuts, limit switches, safety nut, travel nuts, linear shafts and bearings, linear guides and bearings, telescopic spring covers, bellows boot, protective tube, trunnion adapter plates, trunnion mounting brackets, motor flanges, rotary encoders, potentiometers, frequency inverters and position indicators etc.
5. Electric CZPT Actuators Series: Parallel heavy duty linear actuators, In-line heavy duty linear actuators.
6. Geared CZPT s and CZPT Reducers Series: helical gearmotors R series, CZPT cal bevel gearmotors K series, parallel shaft CZPT cal gearmotors F series, CZPT cal CZPT motors S series, small AC gear motor series and CZPT motor reducer series.

Contact Information
JACTON Industry Co.,Ltd (VAT No.: 9144190007026567X3, registered Capital 500000CNY) is a leading manufacturer and supplier of CZPT Jacks (Mechanical Actuators), Bevel Gearboxes, CZPT ing Systems, CZPT ctric CZPT Actuators, Gearmotors and CZPT Reducers, and CZPT s CZPT Motion and CZPT Transmission Products in CZPT . We are Alibaba, Made-In-China and SGS (Serial NO.: QIP-ASI192186) audited manufacturer and supplier. We also have a strict quality system, with senior engineers, experienced skilled workers and practiced sales teams, we consistently provide the high quality equipments to meet the CZPT ers electro-mechanical actuation, lifting and positioning needs. CZPT TON Industry guarantees quality, reliability, performance and value for today’s demanding industrial applications.
Website (English): screw-jacks.en.made-in-china.com
Website (English): screw-jacks.en.made-in-china.com
Website (Chinese): screw-jacks.en.made-in-china.com

East near me shop well Gear Reducer Right Angle manufacturer Miter Gear Box Manufactured in Shanghai

Product Description

EWS series adopts CZPT cal gear – CZPT speed reducer motor integrated drive to improve the torque and efficiency of the speed reducer with wide range of rotating speed and good CZPT ity, it is applicable to varied installation modes and features safe and reliable performance, and CZPT service life, additionally, it also complies with the international standard.

Characteristic advantage
1.Combination of CZPT cal gear and worm, vertical output, compact structure, high speed ratio.
2.The concave-convex surface of the product provides the function of heat dissipation, and features strong vibration absorption, low temperature rise, low noise.
3.The product features high drive precision, and is especially suitable for the site with frequent start, is can be connected with varied speed reducers and configuring varied motor drives, and can be installed at the 90º drive operation site.

Specification parameter
Installation type : Foot,flange,small flange,torque arm.
Output type : Solid shaft,hollow shaft,hollow shaft with shrink disk,spline hollow shaft.
Input type : Motor,input shaft and flange
technical parameters : ratio i=23.8~389,combination of EWS/EWR is up to26688
Efficiency : ratio i=23.8~389,77%;ratio i=73.7~389,62%;and combination of EWS/EWR57%.

Industrial Application
Power Plant Equipment
Metallurgical Industry
Metal Forming CZPT ry
Petrochemical Industry
Mining CZPT
Hoisting CZPT ry
Construction Industry
Environmental CZPT Industry
Cable Industry
Food CZPT ry

Certificates
Passed ” ISO 9001 CZPT Quality System Certificate”,”Europe CE Certificate”, ” Swiss SGS Certificate”,”High-tech enterprise certificate of ZheJiang city”,”Excellent performance management enterprise of ZheJiang city”,etc.
FAQ
1. Q: Can you make as per CZPT drawing?
A: Yes, we offer CZPT ized service for CZPT ers.
2. Q: Are you a factory or trading company?
A. We are manufacturer in ZheJiang CZPT .
3. Q: What’s your MOQ?
A: One piece.
4. Q: What’s your production time?
A: 7-15 working days after receiving payment.
5. Q: What’s your payment terms?
A: T/T, 30% payment in CZPT , 70% balance payment should be paid before shipping.
6. Q: What’s your package?
A: In wooden box packaging.

ZheJiang CZPT CZPT Gear Reducer Co.,Ltd., former a joint venture invested by is a ZheJiang CZPT CZPT CZPT UP and Well Company of CZPT ica.We are professional manufacturer of the gear reducers and specialize in the gear reducers area in CZPT for 20 years. CZPT CZPT has excellent R&D team,top-ranking production and test equipment.So we have the strong CZPT in the developing and manufacturing the standards type as well as the CZPT ized type gear reducer for CZPT CZPT ers.

Best 90 Degree Reduci manufacturer ng Gear Boxes, Cheap Miter Box Gear 90 Degrees Drive Shafts Price

Product Description

We are professional best 90 degree reducing CZPT es, miter box gear 90 degrees drive shafts manufacturers and suppliers from CZPT . All 90 degree reducing CZPT es, miter box gear 90 degrees drive shafts will be tested and inspection reports before products shipment.

JTP Series Cubic Bevel Gearbox

JTP65 Mini Cubic Bevel Gearbox 1. bevel gear ratio 1:1 2. solid drive shafts diameter12mm 3. solid input and output shaft shafts 4. 2 way, 3 way, 4 way gearbox 5. input CZPT maximum 1.8Kw 6. drive torque maximum 13.5Nm 7. maximum input 1500rpm	JTP90 Cubic Bevel Gearbox 1. gear ratios 1:1, 1.5:1, 2:1, 3:1, 4:1 5:1 2. cubic, 6 mount positions, CZPT mount 3. solid shaft, hollow shaft, motor flange 4. 2 way, 3 way, 4 way gearbox 5. input CZPT maximum 6Kw 6. drive torque maximum 43.3Nm 7. maximum input 1500rpm	JTP110 Cubic Bevel Gearbox 1. gear ratios 1:1, 1.5:1, 2:1, 3:1, 4:1 5:1 2. cubic, 6 mount positions, CZPT mount 3. solid shaft, hollow shaft, motor flange 4. 2 way, 3 way, 4 way gearbox 5. input CZPT maximum 11Kw 6. drive torque maximum 78.3Nm 7. maximum input 1500rpm
JTP140 Cubic Bevel Gearbox 1. gear ratios 1:1, 1.5:1, 2:1, 3:1, 4:1 5:1 2. cubic, 6 mount positions, CZPT mount 3. solid shaft, hollow shaft, motor flange 4. 2 way, 3 way, 4 way gearbox 5. input CZPT maximum 23. 9Kw 6. drive torque maximum 170Nm 7. maximum input 1500rpm	JTP170 Cubic Bevel Gearbox 1. gear ratios 1:1, 1.5:1, 2:1, 3:1, 4:1 5:1 2. cubic, 6 mount positions, CZPT mount 3. solid shaft, hollow shaft, motor flange 4. 2 way, 3 way, 4 way gearbox 5. input CZPT maximum 39.2Kw 6. drive torque maximum 290Nm 7. maximum input 1500rpm	JTP210 Cubic Bevel Gearbox 1. gear ratios 1:1, 1.5:1, 2:1, 3:1, 4:1 5:1 2. cubic, 6 mount positions, CZPT mount 3. solid shaft, hollow shaft, motor flange 4. 2 way, 3 way, 4 way gearbox 5. input CZPT maximum 67.5Kw 6. drive torque maximum 520Nm 7. maximum input 1500rpm
JTP240 Cubic Bevel Gearbox 1. gear ratios 1:1, 1.5:1, 2:1, 3:1, 4:1 5:1 2. cubic, 6 mount positions, CZPT mount 3. solid shaft, hollow shaft, motor flange 4. 2 way, 3 way, 4 way gearbox 5. input CZPT maximum 90.5Kw 6. drive torque maximum 694Nm 7. maximum input 1500rpm	JTP280 Cubic Bevel Gearbox 1. gear ratios 1:1, 1.5:1, 2:1, 3:1, 4:1 5:1 2. cubic, 6 mount positions, CZPT mount 3. solid shaft, hollow shaft, motor flange 4. 2 way, 3 way, 4 way gearbox 5. input CZPT maximum 156Kw 6. drive torque maximum 1199Nm 7. maximum input 1500rpm

JT Series Spiral Bevel Gearbox

JT15 Spiral Bevel Gearbox 1. spiral teeth miter bevel gears 2. 90 degree right angle drives 3. bevel gear ratios 1:1, 2:1 4. 2 way, 3 way, 4 way gearboxes 5. input CZPT maximum 1.79Kw 6. drive torque maximum 28Nm 7. drive shaft diameter 15mm	JT19 Spiral Bevel Gearbox 1. spiral teeth miter bevel gears 2. 90 degree right angle drives 3. bevel gear ratios 1:1, 2:1 4. 2 way, 3 way, 4 way gearboxes 5. input CZPT maximum 4.94Kw 6. drive torque maximum 48.5Nm 7. drive shaft diameter 19mm	JT25 Spiral Bevel Gearbox 1. spiral teeth miter bevel gears 2. 90 degree right angle drives 3. ratios 1:1, 1.5:1, 2:1, 2.5:1, 3:1, 4:1, 5:1 4. 2 way, 3 way, 4 way gearboxes 5. input CZPT maximum 14.9Kw 6. drive torque maximum 132Nm 7. drive shaft diameter 25mm
JT32 Spiral Bevel Gearbox 1. spiral teeth miter bevel gears 2. 90 degree right angle drives 3. ratios 1:1, 1.5:1, 2:1, 2.5:1, 3:1, 4:1, 5:1 4. 2 way, 3 way, 4 way gearboxes 5. input CZPT maximum 22Kw 6. drive torque maximum 214Nm 7. drive shaft diameter 32mm	JT40 Spiral Bevel Gearbox 1. spiral teeth miter bevel gears 2. 90 degree right angle drives 3. ratios 1:1, 1.5:1, 2:1, 2.5:1, 3:1, 4:1, 5:1 4. 2 way, 3 way, 4 way gearboxes 5. input CZPT maximum 45.6Kw 6. drive torque maximum 361Nm 7. drive shaft diameter 40mm	JT45 Spiral Bevel Gearbox 1. spiral teeth miter bevel gears 2. 90 degree right angle drives 3. ratios 1:1, 1.5:1, 2:1, 2.5:1, 3:1, 4:1, 5:1 4. 2 way, 3 way, 4 way gearboxes 5. input CZPT maximum 65. 3Kw 6. drive torque maximum 561Nm 7. drive shaft diameter 45mm
JT50 Spiral Bevel Gearbox 1. spiral teeth miter bevel gears 2. 90 degree right angle drives 3. ratios 1:1, 1.5:1, 2:1, 2.5:1, 3:1, 4:1, 5:1 4. 2 way, 3 way, 4 way gearboxes 5. input CZPT maximum 96Kw 6. drive torque maximum 919Nm 7. drive shaft diameter 50mm	JT60 Spiral Bevel Gearbox 1. spiral teeth miter bevel gears 2. 90 degree right angle drives 3. ratios 1:1, 2:1, 3:1, 4:1, 5:1 4. 2 way, 3 way, 4 way gearboxes 5. input CZPT maximum 163Kw 6. drive torque maximum 1940Nm 7. drive shaft diameter 60mm	JT72 Spiral Bevel Gearbox 1. spiral teeth miter bevel gears 2. 90 degree right angle drives 3. ratios 1:1, 2:1, 3:1, 4:1, 5:1 4. 2 way, 3 way, 4 way gearboxes 5. input CZPT maximum 234Kw 6. drive torque maximum 3205Nm 7. drive shaft diameter 72mm
JT85 Spiral Bevel Gearbox 1. spiral teeth miter bevel gears 2. 90 degree right angle drives 3. ratios 1:1, 2:1, 3:1, 4:1, 5:1 4. 2 way, 3 way, 4 way gearboxes 5. input CZPT maximum 335Kw 6. drive torque maximum 5713Nm 7. drive shaft diameter 85mm

JTA Series CZPT Bevel Gearbox

JTA10 CZPT Bevel Gearbox 1. die-casting aluminum housing 2. lightweight, small, corrosion resistance 3. spiral teeth miter bevel gears 4. 90 degree right angle drives 5. bevel gear ratios 1:1 6. 2 way, 3 way gearboxes 7. input CZPT maximum 0.31Kw 8. drive torque maximum 3.82Nm 9. maximum input 1500rpm	JTA15 CZPT Bevel Gearbox 1. die-casting aluminum housing 2. lightweight, small, corrosion resistance 3. spiral teeth miter bevel gears 4. 90 degree right angle drives 5. bevel gear ratios 1:1, 2:1 6. 2 way, 3 way gearboxes 7. input CZPT maximum 1.11Kw 8. drive torque maximum 7.64Nm 9. maximum input 1500rpm	JTA20 CZPT Bevel Gearbox 1. die-casting aluminum housing 2. lightweight, small, corrosion resistance 3. spiral teeth miter bevel gears 4. 90 degree right angle drives 5. bevel gear ratios 1:1, 2:1 6. 2 way, 3 way gearboxes 7. input CZPT maximum 1.92Kw 8. drive torque maximum 18.15Nm 9. maximum input 1500rpm
JTA24 CZPT Bevel Gearbox 1. die-casting aluminum housing 2. lightweight, small, corrosion resistance 3. spiral teeth miter bevel gears 4. 90 degree right angle drives 5. bevel gear ratios 1:1, 2:1 6. 2 way, 3 way gearboxes 7. input CZPT maximum 4.94Kw 8. drive torque maximum 47.75Nm 9. maximum input 1500rpm

Gear Transmission Ratio 1: 1 Spiral Bevel Gearbox best , Four Way 90 Degree Gear Drives, Right Angle 3 Way Ge manufacturer arbox, Miter Gearboxes, Micro-Miniature Bevel Gear Box

Product Description

This Miter Bevel Gearbox is also known as spiral bevel gearbox, spiral bevel gear drives, spiral bevel gear reducers, right angle miter gearbox, or 90 degree bevel gearbox. The spiral bevel gear delivers high transmission capacity and high efficiency. The Spiral Bevel Gearboxes are specifically engineered for use with machine screw jacks and actuators in multiple jack systems. You have several linear drives that you would like to connect together – i.e. to synchronize. For economic reasons, you don’t want to drive every single linear drive separately with its own electric motor. This is where CZPT bevel gearboxes come into their own.

Right CZPT le Spiral Bevel Gearbox Applications: 90-degree reducers are used throughout dozens of industries to alter torque and speed in drive components. Any use that demands the reliable transfer of speed or CZPT . There are countless applications for 3-way transmission gearboxes, some of which include: CZPT Dryers, Folding CZPT s, Brushing CZPT ry, CZPT Transmission Equipment, Pumps, Damper CZPT , Case CZPT ers, Paper Rewinders, Test Equipment. Our Right CZPT le Bevel Gearbox lineup includes shaft to shaft, shaft to bore, bore to bore, 2 shaft, 3 shaft, high ratio, and low profile models. All CZPT Bevel T right angle gearboxes are built with a single output shaft extended out both sides of the box, so both ends rotate simultaneously in the same direction.

Compact Cubic CZPT Spiral Bevel Gearbox with Solid Shafts
The spiral bevel gearbox offers a robust, CZPT ful and compact design, for right angle CZPT transmission. The practical cubic shape of bevel gearboxes allow CZPT mounting possibilities on every kind of machines. They are proven in the market for their versatility, very low backlash and low transmission error. The design comprises of ball bearings for quiet operation and tapered bearings for higher radial load capacity. Application in Pulp and paper industry, food processing, off-shore industry, mining and mineral industry, paper machine drives, pulper drives, blowers, pumps, vacuum pump drives and flooding pump stations.
JTP Series: Solid shaft input, Solid shaft output.
JTPH Series: Solid shaft input, Hollow shaft output.
JTPF Series: Input Flange(IEC, NEMA), Solid shaft output.
JTPG Series: Input Flange(IEC, NEMA), Hollow shaft output.

Features:
* CZPT Compact Design. All-round machined symmetrical housing, and all-round tapped holes for CZPT mounting, 6 possible mounting positions.
* Gears ratios of 1:1, 1.5:1, 2:1, 3:1, 4:1 and 5:1 are actual ones.
* CZPT range from 0.1kw to 156kw, Torque range from 11.5Nm to 1199Nm.
* Gear transmission average efficiency up to 94%.
* 2-way, 3-way and 4-way Configurations. Allows both horizontal and vertical shafts.
* Solid Shaft, Hollow Shaft, and Direct motor mount or via motor flanges.
* Various Shafts Arrangements, Rotation Directions and Mounting Positions CZPT .
* CZPT efficiency, high transmission capacity, low backlash, noiseless operation, low running temperature and CZPT service life.

T Series Right CZPT le Spiral Bevel Gearbox
JT Series Spiral Bevel Gearboxes with the use of high-precision spiral bevel gears, delivers high transmission efficiency and high transfer capacity, high performance, low backlash, smooth rotation, silent drive possible, low running temperature, CZPT life and easy installation. General applications in CZPT screw jack systems, industrial dryers, folding machines, brushing machinery, CZPT transmission equipment, pumps, damper controls, case openers, paper rewinders, test equipment, blowers and fans, unloaders and unscramblers, bottle capping, electroplating machinery, folding machines, food processing equipment, transfer machines, chemical mixers and recording equipment.

Features:
* Used in pairs case hardened alloy steel spiral bevel gears to transmit rotary motion, mechanical CZPT and torque.
* Gears ratios of 1:1, 1.5:1, 2:1, 2.5:1, 3:1, 4:1 and 5:1 are actual ones.
* CZPT range from 1.79kw to 335kw, Torque range from 28Nm to 5713Nm.
* Gear transmission average efficiency up to 94%.
* 2-way, 3-way and 4-way Configurations. Allows both horizontal and vertical shafts.
* Solid Shaft, Hollow Shaft, and Direct motor mount or via motor flanges.
* Various Shafts Arrangements, Rotation Directions and Mounting Positions CZPT .
* CZPT efficiency, high transmission capacity, low backlash, noiseless operation, low running temperature and CZPT service life.

Space-saving Aluminium Gearboxes – CZPT weight, CZPT Small
JTA Series CZPT Alloy Bevel Gearbox is a small-sized, ultra-lightweight type of CZPT miter CZPT . These units are lubricated for life to assure trouble free service. CZPT -performance spiral bevel gear is used to enable silent and high transmission operations. CZPT mounting type that can be mounted in any direction. 1:1 and 2:1 ratios, with two or three shafts orientations. 4 sizes are CZPT to suit your needs in a compact, maintenance free, ready to use package.

Features:
* Compact design, Small sizes, CZPT light weight.
* Gears ratios of 1:1, 2:1 are actual ones.
* CZPT range from 0.02kw to 4.94kw, Torque range from 2Nm to 40Nm.
* Gear transmission average efficiency up to 94%.
* 2-shafts and 3-shafts Configurations. Allows both horizontal and vertical shafts.
* CZPT efficiency, low backlash, noiseless operation, low running temperature and CZPT service life.

Structures and CZPT :
* Spiral bevel gears: CZPT purity rugged alloy steel 20CrMnTiH, carburizing and quenching, case hardened and lapped in pairs for intersecting shafts, low noise with grinded spiral teeth, high torque with milled teeth, high rigidity and wear resistance.
* Housings(Gearboxes): CZPT alloy.
* Input and output shafts: Hardened and tempered alloy steel material, hanging heavy load capacity With key and key way. CZPT corrosion resistant stainless steel shafts, or other corrosion resistance painting shafts, spline shaft, shaft without key and key way.
* CZPT s: CZPT duty tapered roller bearing. CZPT reinforced bearings for higher radial and axial load. CZPT corrosion resistant stainless steel bearings.
Spiral-bevel gear drives, like all bevel gear drives, are designed for high capacity, efficiency, quiet operation, and CZPT service life. These spiral-bevel gear drives are designed for operation that’s as reliable as it is quiet. Their shafts are heat treated and alloy-steel mounted on heavy-duty, tapered roller bearings for smoother operation. Their housings are made of precision-machined cast iron to ensure accurate, permanent alignment of the gears for superior performance. Double-bearing input support extends horsepower capacity and increases durability.
Right 90 spiral-bevel gear drives are designed for high efficiency, quiet operation, and CZPT service life. Housings are made of lightweight aluminum alloy. Performance that’s reliable, efficient, and as noise-free as possible Input and output shaft flanges simplify mounting and installation Can be used to either reduce or increase speed Single and double-projecting output shafts for application flexibility Ground alloy steel shafts are mounted on precision ball bearings for smooth operation Pre-lubrication designed to last for the life of the drive improves performance and reduces maintenance.
Bevel gear drives feature compact, rugged construction and precision-forged, spiral-tooth bevel gears, making them ideal for industrial applications where low-speed/ high-torque drives are required. Spiral-tooth bevel gears have teeth that are made from precision-forged alloy steel for maximum strength, as well as case hardened for increased durability. Input and output shafts are constructed from ground and polished heat-treated alloy steel to further enhance the overall toughness of these drives. CZPT -machined, one-piece, quality cast-iron housings mean less maintenance and greater reliability. Double-lip, garter-spring-type oil seals are use to retain lubricants and block foreign-matter contamination for extended life. All drives are furnished with keys for projecting shafts to assure quick installation.

Company Profiles
JACTON Industry Co.,Ltd (VAT No.: 9144190007026567X3, registered Capital 500000CNY) is a leading manufacturer and supplier of CZPT Jacks (Mechanical Actuators), Bevel Gearboxes, CZPT ing Systems, CZPT ctric CZPT Actuators, Gearmotors and CZPT Reducers, CZPT s CZPT Motion and CZPT Transmission Products in CZPT . We are located in Chang An, Xihu (West CZPT ) Dis. guan, CZPT g dong in CZPT . We are an audited professional manufacturer and supplier by SGS (Serial NO.: QIP-ASI192186) and BV (Serial NO.: MIC-ASR257162) organizations. We have a strict quality system, with senior engineers, experienced skilled workers and practiced sales teams, and consistently provide the CZPT ers with the best engineered solution for precision linear actuation, CZPT transmission and mechanical jacking systems. CZPT Industries guarantees quality, reliability, performance and value for today’s demanding industrial applications.

Company Advantages
* One of the biggest orders with 1750 units screw lift jacks.
* Standard products with 2D Drawings(DXF, DWG, PDF) and 3D CAD Model(STEP).
* 100% quality assured with double quality inspections. Original Inspection Reports, Operation Manual, and Book Catalogue are put into the packages.
* 100% safety transportation with strong standard export plywood cases materials (free fumigation).
* CZPT standard materials for all standard products.
* CZPT design CZPT , CZPT service CZPT , Free CZPT advice and CZPT er label CZPT .

Products List
* Manual CZPT Jacks
* CZPT ctric CZPT Jacks
* CZPT Jacks Series:
Cubic CZPT Jack JTC Series, CZPT CZPT Jack JTW Series, Trapezoidal CZPT Jack JT Series, Worm CZPT Jack JTM Series, CZPT Steel CZPT Jack JSS Series, Through Hole CZPT Jack JTH Series, Ball CZPT Jack JTB Series, Cubic Ball CZPT Jack JTD Series, Bevel Gear CZPT Jack JTS Series and JTG Series, and CZPT ctric Cylinder JTE Series.
* Bevel Gearboxes Series:
Cubic Bevel Gearbox JTP Series, Hollow Shaft Gearbox JTPH Series, Input Flange Gearbox JTPF Series, Input Flange and Hollow shaft Gearbox JTPG Series, CZPT Steel Gearbox JTP Series, CZPT Gearbox JTA Series, and Bevel Gearboxes JT Series.
* CZPT Jack CZPT ing Systems and Accessories:
2jacks lifting system, 3jacks lifting system, 4jacks lifting system, 6jacks lifting system, 8jacks lifting system……14jacks lifting system. CZPT ing systems accessories cover ac, dc motors, geared motors, servo motors, stepper motors, handwheels, couplings, CZPT joints, telescopic CZPT joints, connecting shafts, cardan shafts, limit switches, proximity switches, safety nut, travel nut, rod ends, stop nuts, pillow block bearings, flange blocks, motor flange nema or iec, encoder, potentiometer, frequency converter, position indicators, trunnion plate, and trunnion mounting brackets.
* CZPT ctric CZPT Actuators Series:
Electro CZPT Actuators LA Series, CZPT ctro CZPT Actuators LAP Series.
* Gear Reducers Series:
Helical Gear Reducers R Series, CZPT cal Bevel Gear Reducers K Series, Parallel Shaft CZPT cal Gear Reducers F Series, CZPT cal Worm Gear Reducers S Series, CZPT cal Gear CZPT GMH/GMV Series, and Worm Gear Reducers NMRV Series.

Customers Distribution Countries
* CZPT ican Countries: United States, Mexico, Canada, Chile, Argentina, Xihu (West CZPT ) Dis.via, Brazil, Colombia, Guatemala, Honduras, Panama, Peru.
* CZPT pean Countries: Germany, France, CZPT CZPT dom, CZPT , Spain, Poland, CZPT ia, Netherlands, Belgium, Greece, Czech Republic, Portugal, Sweden, Hungary, Austria, Switzerland, Bulgaria, Denmark, Finland, Slovakia, Norway, Ireland, Georgia, Slovenia.
* Asian Countries: Malaysia, Indonesia, Singapore, Philippines, Vietnam, Thailand, India, Israel, Cambodia, Myanmar, Sri Lanka, Maldives, Pakistan, Iran, Turkey, Jordan, Saudi Arabia, Yemen, Oman, CZPT Arab Emirates, Qatar, Georgia, Armenia.
* CZPT ian Countries: Australia, New Zealand.
* African Countries: Egypt, Ethiopia, Nigeria, South Africa, Zambia, Mozambique.

in Erode India sales price shop near me near me shop factory supplier Custom High Quality Zinc Alloy Die Casting Die & Mould for Auto Parts Motorcycle Parts LED Lamp Electric Parts Gear Box Cover Auto Spare Parts Auto Parts Bottom manufacturer best Cost Custom Cheap wholesaler

in Erode India sales price shop near me near me shop factory supplier Custom High Quality Zinc Alloy Die Casting Die & Mould for Auto Parts Motorcycle Parts LED Lamp Electric Parts Gear Box Cover Auto Spare Parts Auto Parts Bottom manufacturer best Cost Custom Cheap wholesaler

we are assured to offer our consumers versatile and diversified services. we have obtained the have faith in of customers around the world. We can offer a complete-variety of power transmission items like chains, sprockets and plate wheels, pulleys, gearboxes, motors, couplings, gears and racks. Manufacture Approach:
one.Evaluation the component design and style,drawings and good quality stXiHu (West EPT) Dis.Hu (West EPT) Dis.rd from consumers.
2. EPT and EPT design amp manufacturing
3. EPT and EPT tests amp verify the sample
four. Die casting uncooked castings
five.Surface treatment: Trimming,Deburring, poEPTTng, cleaning, passivation amp EPTT coating and other, necessity from Client
6. EPT machining: CNC lathes, milling, drilling, grinding etc
7. Complete Inspection
eight. EPTT
nine. Delivery

EPT data:
Adhering to customers’ need to make the molds.
Mold base: LKM C50 stXiHu (West EPT) Dis.Hu (West EPT) Dis.rd mould molds
Inserts(cavity and core): Dievar, H13, 8407, one.2344 or the material you required.
StXiHu (West EPT) Dis.Hu (West EPT) Dis.rd parts: EPTSCO, DME, MISUMI, Punch
Portion materials: ADC12, ADC14, ADC10, A413.two, A360, A380, AlSi9Cu3, ZAMAK#3, ZAMAK#five, ZAMAK#2, ZAMAK#eight, Laptop,PA,Abs,PVC,PA66,TPE,SAN,POMand so on
EPT time of very first samples: Around three~5weeks.

Services:

one. OEM and ODM.
two. Quotation inside 24 hours.
3. Inspection support by SGS or any other inspection assigned by Client.
four. EPT service.
five. Right after support

Why option us:

one.EPT is a precision EPT processing company with almost 20 years of expertise.With encounter specialized crew make certain us being able to provide the provider with Worldwide stXiHu (West EPT) Dis.Hu (West EPT) Dis.rd in the direction of to our clients.
two.It is identified for its fast generation, OEM and personalised customization.It is specialist at EPT R ampD toughness, exquisite workmanship, merchandise of numerous resources and intricate designs.
3.Rely on International tooling planning concept and production,we could construct tailor-created instrument to fulfill with your goods good quality prerequisite.
four.Geared up EPT with top overall performance die casting EPTTs and CNC EPTTs, give us the chance to produce substantial precision merchandise.
five.The strong software technological support in the direction of the buyer in task deveXiHu (West EPT) Dis.Hu (West EPT) Dis.ment section which difference from the other suppliers. From the drawing style, creation, inspection, approach layer on layer check, To exceed the market stXiHu (West EPT) Dis.Hu (West EPT) Dis.rd, Suggest feasible advancement prepare for the item composition, minimize the EPT, and make the customer’s product far more competitive in the industry. Our mission is building EPTT term co-operation with our customers.

FAQ

1: What are our Rewards above other individuals?
a).We are the Manufacture,not a trading company, significantly less EPT purchase, aggressive price tag.
b).EPT is a precision EPT processing producer with virtually 20 a long time of expertise.
f).In the course of our cooperation: We have QC section,EPT office,Engineer section, EPT office.,Following-EPT,Section,
to provide you all the time.

2. Can you despatched the merchandise drawing to me?
Pictures on web site was just for reference, Far more correct information and some EPTT demands,
Please kindly make contact with us.

three. Can you make OEM purchase?
Indeed, OEM/ODM orders are welcome. You are warmly welcome to ship the your patterns to us, We will supply you sensible prices with large
good quality You should provide us the drawings or you should notify us the in depth data what you need to have, we can duplicate the areas in accordance to your
info.

4. How EPTT can I count on to get the sample?
Samples will be all set for delivery in three-10 daEPTTafter we confirmed the shop drawings, The samples will be sent to you through specific and arrive in
3-5 times.

five. What about the direct time for mass creation?
EPTly, typically it is 15-30 days, and it relies upon on the orEPTTquantity and the EPTTon you area the order. EPTTly sEPTing, (if you project is urgent, we can support you short it), we recommend that you start inquiry a single months before the date you would like to get the goods at your place.

6. What are your conditions of delivery?
We settle for EXW, FOB, CNF, and so on. You can choose the most hassle-free one particular. ReXiHu (West EPT) Dis.Hu (West EPT) Dis.ding to the transport EPT, if you have your very own convey account
that will be welcome.

in Kota India sales price shop near me near me shop factory supplier Transmission Helical Gear Used on Speed-up Box Reducer manufacturer best Cost Custom Cheap wholesaler

We supply OEM services. Top quality and credit score are the bases that make a corporation alive. EPG will usually adhere to it organization spirit of currently being useful, modern, efficient and outstanding to make the best intercontinental transmission travel. EPTT EPTcal EPT Employed on Pace-up Box EPTT

one. Description

No.	Item	Description
1	Identify	EPTcal EPT
two	Size	EPT can be EPT.
3	Manufacture StXiHu (West EPT) Dis.Hu (West EPT) Dis.rd	5-8 Quality ISO1328-1997.
4	EPT	forty five#Steel,20CrMnTi,40Cr,20CrNiMo,20MnCr5,GCR15SiMn,42CrMo,2Cr13stainless metal,Nylon,Bakelite,Copper,Aluminium.and so on
5	Manufacturing Approach	The major approach is EPT Hobbing, EPT Shaping and EPT EPT, Selecting generation procedure in accordance to the diverse items.
6	Heat Treatment method	Carburizing and quenching ,EPT-frequency quenching,Nitriding, Hardening and tempering, Selecting heat treatment method in accordance to the various supplies.
7	Testing EPT	Rockwell hardness tester 500RA, EPTT mesh instrument EPTT-200B amp 3102,EPT measurement cEPTTr instrument CNC3906T and other EPT precision detection equipments
eight	Certification	GB/T19001-2016/ISO9001:2015
9	Usage	Utilized in printing EPTT, cleaning EPTT, health care equipment, XiHu (West EPT) Dis.Hu (West EPT) Dis.den EPTT, design EPTT, electric auto, valve, forklift, transportation tools and a variety of EPT EPTTs.and so forth
10	Deal	According to customer’s ask for

two. Images

three. OrEPTTprocess
a. Buyer sends us the drawing or sample, If only sample, our company supply the CAD drawing.
b. Our firm supplies the processing strategy and quotation.
c. Our organization materials the sample soon after customer confirmed processing method and quotation.
d. Client areas the orEPTTafter confirm the sample.
e. Buyer pay out fifty% deposit.
f. EPTtity creation.
g. Pay out the stability following the acceptance and affirmation.
h. Delivery.

in Kota India sales price shop near me near me shop factory supplier Transmission Helical Gear Used on Speed-up Box Reducer manufacturer best Cost Custom Cheap wholesaler

mitergears

Mail:[email protected]

Tag Archives: gear box manufacturer

China manufacturer Varitron Cyclo Drive Gear Box Speed Reducer Motor CZPT Harmonic Gear worm and wheel gear

Product Description

Types of Bevel Gears

Spiral bevel gear

Straight bevel gear

Hypoid bevel gear

Addendum and dedendum angles

Applications of bevel gears

China OEM Metal Parts Manufacturer Excavator Gear Worm Gear gear box

Merchandise Description

How to Compare Different Types of Spur Gears

Common applications

Construction

Addendum circle

Pitch diameter

Material

K Series Small Fl manufacturer ange Hollow Shaft Mounted Spiral Bevel Gea sales r Reducer Gear Box

Product Description

Best Light Duty 90 Degree Gearbox, manufacturer Small Square Custom Box 90 Degree Drive Shaft, Gear Transmission Miniature Price

Product Description

Miter Gear B manufacturer ox or Right Angle Gear Custom Box of Spiral Bevel Gears with High Efficiency High Power Rating. Use in Transmission Truing and Torque Linear Stretch.

Product Description

East near me shop well Gear Reducer Right Angle manufacturer Miter Gear Box Manufactured in Shanghai

Product Description

Best 90 Degree Reduci manufacturer ng Gear Boxes, Cheap Miter Box Gear 90 Degrees Drive Shafts Price

Product Description

Gear Transmission Ratio 1: 1 Spiral Bevel Gearbox best , Four Way 90 Degree Gear Drives, Right Angle 3 Way Ge manufacturer arbox, Miter Gearboxes, Micro-Miniature Bevel Gear Box

Product Description

in Erode India sales price shop near me near me shop factory supplier Custom High Quality Zinc Alloy Die Casting Die & Mould for Auto Parts Motorcycle Parts LED Lamp Electric Parts Gear Box Cover Auto Spare Parts Auto Parts Bottom manufacturer best Cost Custom Cheap wholesaler

in Kota India sales price shop near me near me shop factory supplier Transmission Helical Gear Used on Speed-up Box Reducer manufacturer best Cost Custom Cheap wholesaler