Solution Description
Item Description:
1. Flexspline is a hollow flanging regular cylinder framework.
two. There is a large-diameter hollow shaft gap in the center of the cam of the wave generator. The inside design of the reducer has a help bearing.
3. It has a completely sealed structure and is simple to set up. It is very appropriate for the situations in which the wire needs to be threaded from the centre of the reducer.
Advantages:
1. High precision,large torque
two. Focused technological staff can be on-the-go to offer style solutions
3. Manufacturing unit immediate sales fine workmanship sturdy good quality assurance
four. Solution quality troubles have a one particular-yr warranty time, can be returned for replacement or mend
Company profile:
HangZhou CZPT Technologies Co., Ltd. was established in 2014. Dependent on lengthy-term gathered expertise in mechanical style and production, a variety of sorts of harmonic reducers have been developed according to the different needs of customers. The organization is in a phase of fast development. , Gear and staff are continuously increasing. Now we have a team of skilled specialized and managerial staff, with sophisticated equipment, total testing techniques, and product producing and layout abilities. Product design and generation can be carried out in accordance to buyer needs, and a range of higher-precision transmission components such as harmonic reducers and RV reducers have been fashioned the goods have been offered in domestic and groble(Such as United states of america,Germany ,Turkey,India) and have been used in industrial robots, machine tools, healthcare products, laser processing, chopping, and dispensing , Brush making, LED tools manufacturing, precision digital products and other industries have recognized a good track record.
In the future, Hongwing will adhere to the function of gathering talents, retaining near to the industry, and technological innovation, have CZPT the worth pursuit in the subject of harmonic generate&RV reducers, look for the widespread improvement of the organization and the culture, and quietly create alone into a CZPT brand name with independent intellectual home legal rights. Quality supplier in the area of precision transmission”.
Strength manufacturing unit:
Our plant has an whole campus The number of workshops is around 300 No matter whether it truly is from the manufacturing of uncooked supplies and the procurement of raw components to the inspection of concluded merchandise, we’re carrying out it ourselves. There is a full manufacturing program
HST-III Parameter:
Model | Speed ratio | Enter the rated torque at 2000r/min | Allowed CZPT torque at begin end | The allowable optimum of the regular load torque | Maximum torque is authorized in an instant | Enable the maximum speed to be entered | Typical input speed is permitted | Back again hole | layout existence | ||||
NM | kgfm | NM | kgfm | NM | kgfm | NM | kgfm | r / min | r / min | Arc sec | Hour | ||
14 | fifty | six.two | .six | 20.7 | 2.one | 7.9 | .7 | forty.3 | four.one | 7000 | 3000 | ≤30 | 10000 |
80 | 9 | .9 | 27 | 2.seven | 12.seven | 1.three | 54.1 | five.five | |||||
100 | 9 | .9 | 32 | 3.three | twelve.7 | 1.3 | 62.1 | 6.three | |||||
17 | 50 | 18.4 | 1.9 | 39 | 4 | 29.9 | three | 80.five | eight.2 | 6500 | 3000 | ≤30 | 15000 |
eighty | twenty five.3 | two.6 | forty nine.5 | five | 31 | three.two | 100.one | ten.2 | |||||
100 | 27.6 | 2.8 | sixty two | six.three | forty five | four.6 | 124.two | 12.7 | |||||
20 | fifty | 28.eight | two.nine | 64.4 | 6.6 | 39 | 4 | 112.seven | eleven.5 | 5600 | 3000 | ≤30 | 15000 |
eighty | 39.1 | four | eighty five | 8.eight | 54 | five.5 | 146.1 | fourteen.9 | |||||
100 | forty six | four.seven | 94.three | 9.six | fifty six | 5.8 | 169.1 | 17.2 | |||||
a hundred and twenty | 46 | 4.7 | 100 | 10.two | 56 | five.eight | 169.one | 17.two | |||||
160 | forty six | 4.7 | a hundred | 10.two | 56 | 5.8 | 169.1 | 17.2 | |||||
25 | 50 | forty four.nine | four.six | 113 | eleven.5 | sixty three | six.five | 213.9 | 21.eight | 4800 | 3000 | ≤30 | 15000 |
80 | 72.five | 7.4 | 158 | 16.1 | a hundred | 10.2 | 293.3 | 29.9 | |||||
a hundred | seventy seven.1 | seven.9 | 181 | eighteen.4 | 124 | twelve.seven | 326.6 | 33.3 | |||||
a hundred and twenty | 77.1 | 7.nine | 192 | 19.six | 124 | twelve.seven | 349.six | 35.6 | |||||
32 | 50 | 87.4 | 8.9 | 248 | twenty five.three | 124 | 12.seven | 439 | forty four.8 | 4000 | 3000 | ≤30 | 15000 |
eighty | 135.7 | 13.eight | 350 | 35.6 | 192 | 19.6 | 653 | 66.six | |||||
a hundred | 157.6 | sixteen.1 | 383 | 39.one | 248 | twenty five.three | 744 | seventy five.9 | |||||
40 | 100 | 308 | 37.2 | 660 | sixty seven | 432 | forty four | 1232 | 126.seven | 4000 | 3000 | ≤30 | 15000 |
HSG Parameter:
Model | Speed ratio | Enter the rated torque at 2000r/min | Allowed CZPT torque at start cease | The allowable highest of the regular load torque | Maximum torque is permitted in an immediate | Enable the maximum velocity to be entered | Average input velocity is allowed | Again hole | design daily life | ||||
NM | kgfm | NM | kgfm | NM | kgfm | NM | kgfm | r / min | r / min | Arc sec | Hour | ||
14 | fifty | 7 | .7 | 23 | two.3 | nine | .9 | forty six | 4.7 | 14000 | 8500 | ≤20 | 15000 |
80 | ten | one | 30 | three.1 | 14 | one.four | 61 | six.two | |||||
one hundred | ten | 1 | 36 | 3.seven | fourteen | one.4 | 70 | 7.2 | |||||
17 | 50 | 21 | two.one | forty four | 4.5 | 34 | three.four | 91 | 9 | 10000 | 7300 | ≤20 | 20000 |
80 | 29 | two.9 | fifty six | five.7 | 35 | 3.6 | 113 | 12 | |||||
one hundred | 31 | 3.2 | 70 | 7.two | fifty one | 5.2 | 143 | 15 | |||||
20 | 50 | 33 | 3.three | seventy three | 7.4 | forty four | four.five | 127 | thirteen | 10000 | 6500 | ≤20 | 20000 |
80 | forty four | four.five | 96 | 9.8 | sixty one | 6.2 | a hundred sixty five | seventeen | |||||
100 | 52 | five.three | 107 | 10.9 | 64 | 6.five | 191 | twenty | |||||
120 | fifty two | five.3 | 113 | eleven.5 | 64 | six.5 | 191 | 20 | |||||
160 | fifty two | five.3 | one hundred twenty | 12.two | sixty four | 6.5 | 191 | 20 | |||||
25 | fifty | fifty one | 5.2 | 127 | 13 | 72 | 7.3 | 242 | twenty five | 7500 | 5600 | ≤20 | 20000 |
80 | eighty two | 8.four | 178 | eighteen | 113 | 12 | 332 | 34 | |||||
100 | 87 | eight.nine | 204 | 21 | one hundred forty | 14 | 369 | 38 | |||||
one hundred twenty | 87 | eight.9 | 217 | 22 | a hundred and forty | 14 | 395 | 40 | |||||
32 | fifty | 99 | ten | 281 | 29 | one hundred forty | fourteen | 497 | 51 | 7000 | 4800 | ≤20 | 20000 |
eighty | 153 | sixteen | 395 | 40 | 217 | 22 | 738 | 75 | |||||
100 | 178 | 18 | 433 | forty four | 281 | 29 | 841 | 86 | |||||
forty | a hundred | 345 | 35 | 738 | seventy five | 484 | 49 | 1400 | 143 | 5600 | 4000 | ≤20 | 20000 |
Exhibitions:
Application circumstance:
FQA:
Q: What ought to I supply when I pick gearbox/pace reducer?
A: The very best way is to offer the motor drawing with parameter. Our engineer will check out and recommend the most suitable gearbox product for your refer.
Or you can also supply beneath specification as properly:
one) Type, design and torque.
two) Ratio or output pace
3) Working problem and relationship approach
four) Good quality and mounted equipment title
five) Input manner and input velocity
6) Motor brand product or flange and motor shaft measurement
Application: | Motor, Machinery, Agricultural Machinery, Hst-I |
---|---|
Hardness: | Hardened Tooth Surface |
Installation: | 90 Degree |
Layout: | Coaxial |
Gear Shape: | Cylindrical Gear |
Step: | Single-Step |
Samples: |
US$ 100/Piece
1 Piece(Min.Order) | |
---|
Customization: |
Available
| Customized Request |
---|
Spiral Gears for Right-Angle Right-Hand Drives
Spiral gears are used in mechanical systems to transmit torque. The bevel gear is a particular type of spiral gear. It is made up of two gears that mesh with one another. Both gears are connected by a bearing. The two gears must be in mesh alignment so that the negative thrust will push them together. If axial play occurs in the bearing, the mesh will have no backlash. Moreover, the design of the spiral gear is based on geometrical tooth forms.
Equations for spiral gear
The theory of divergence requires that the pitch cone radii of the pinion and gear be skewed in different directions. This is done by increasing the slope of the convex surface of the gear’s tooth and decreasing the slope of the concave surface of the pinion’s tooth. The pinion is a ring-shaped wheel with a central bore and a plurality of transverse axes that are offset from the axis of the spiral teeth.
Spiral bevel gears have a helical tooth flank. The spiral is consistent with the cutter curve. The spiral angle b is equal to the pitch cone’s genatrix element. The mean spiral angle bm is the angle between the genatrix element and the tooth flank. The equations in Table 2 are specific for the Spread Blade and Single Side gears from Gleason.
The tooth flank equation of a logarithmic spiral bevel gear is derived using the formation mechanism of the tooth flanks. The tangential contact force and the normal pressure angle of the logarithmic spiral bevel gear were found to be about twenty degrees and 35 degrees respectively. These two types of motion equations were used to solve the problems that arise in determining the transmission stationary. While the theory of logarithmic spiral bevel gear meshing is still in its infancy, it does provide a good starting point for understanding how it works.
This geometry has many different solutions. However, the main two are defined by the root angle of the gear and pinion and the diameter of the spiral gear. The latter is a difficult one to constrain. A 3D sketch of a bevel gear tooth is used as a reference. The radii of the tooth space profile are defined by end point constraints placed on the bottom corners of the tooth space. Then, the radii of the gear tooth are determined by the angle.
The cone distance Am of a spiral gear is also known as the tooth geometry. The cone distance should correlate with the various sections of the cutter path. The cone distance range Am must be able to correlate with the pressure angle of the flanks. The base radii of a bevel gear need not be defined, but this geometry should be considered if the bevel gear does not have a hypoid offset. When developing the tooth geometry of a spiral bevel gear, the first step is to convert the terminology to pinion instead of gear.
The normal system is more convenient for manufacturing helical gears. In addition, the helical gears must be the same helix angle. The opposite hand helical gears must mesh with each other. Likewise, the profile-shifted screw gears need more complex meshing. This gear pair can be manufactured in a similar way to a spur gear. Further, the calculations for the meshing of helical gears are presented in Table 7-1.
Design of spiral bevel gears
A proposed design of spiral bevel gears utilizes a function-to-form mapping method to determine the tooth surface geometry. This solid model is then tested with a surface deviation method to determine whether it is accurate. Compared to other right-angle gear types, spiral bevel gears are more efficient and compact. CZPT Gear Company gears comply with AGMA standards. A higher quality spiral bevel gear set achieves 99% efficiency.
A geometric meshing pair based on geometric elements is proposed and analyzed for spiral bevel gears. This approach can provide high contact strength and is insensitive to shaft angle misalignment. Geometric elements of spiral bevel gears are modeled and discussed. Contact patterns are investigated, as well as the effect of misalignment on the load capacity. In addition, a prototype of the design is fabricated and rolling tests are conducted to verify its accuracy.
The three basic elements of a spiral bevel gear are the pinion-gear pair, the input and output shafts, and the auxiliary flank. The input and output shafts are in torsion, the pinion-gear pair is in torsional rigidity, and the system elasticity is small. These factors make spiral bevel gears ideal for meshing impact. To improve meshing impact, a mathematical model is developed using the tool parameters and initial machine settings.
In recent years, several advances in manufacturing technology have been made to produce high-performance spiral bevel gears. Researchers such as Ding et al. optimized the machine settings and cutter blade profiles to eliminate tooth edge contact, and the result was an accurate and large spiral bevel gear. In fact, this process is still used today for the manufacturing of spiral bevel gears. If you are interested in this technology, you should read on!
The design of spiral bevel gears is complex and intricate, requiring the skills of expert machinists. Spiral bevel gears are the state of the art for transferring power from one system to another. Although spiral bevel gears were once difficult to manufacture, they are now common and widely used in many applications. In fact, spiral bevel gears are the gold standard for right-angle power transfer.While conventional bevel gear machinery can be used to manufacture spiral bevel gears, it is very complex to produce double bevel gears. The double spiral bevel gearset is not machinable with traditional bevel gear machinery. Consequently, novel manufacturing methods have been developed. An additive manufacturing method was used to create a prototype for a double spiral bevel gearset, and the manufacture of a multi-axis CNC machine center will follow.
Spiral bevel gears are critical components of helicopters and aerospace power plants. Their durability, endurance, and meshing performance are crucial for safety. Many researchers have turned to spiral bevel gears to address these issues. One challenge is to reduce noise, improve the transmission efficiency, and increase their endurance. For this reason, spiral bevel gears can be smaller in diameter than straight bevel gears. If you are interested in spiral bevel gears, check out this article.
Limitations to geometrically obtained tooth forms
The geometrically obtained tooth forms of a spiral gear can be calculated from a nonlinear programming problem. The tooth approach Z is the linear displacement error along the contact normal. It can be calculated using the formula given in Eq. (23) with a few additional parameters. However, the result is not accurate for small loads because the signal-to-noise ratio of the strain signal is small.
Geometrically obtained tooth forms can lead to line and point contact tooth forms. However, they have their limits when the tooth bodies invade the geometrically obtained tooth form. This is called interference of tooth profiles. While this limit can be overcome by several other methods, the geometrically obtained tooth forms are limited by the mesh and strength of the teeth. They can only be used when the meshing of the gear is adequate and the relative motion is sufficient.
During the tooth profile measurement, the relative position between the gear and the LTS will constantly change. The sensor mounting surface should be parallel to the rotational axis. The actual orientation of the sensor may differ from this ideal. This may be due to geometrical tolerances of the gear shaft support and the platform. However, this effect is minimal and is not a serious problem. So, it is possible to obtain the geometrically obtained tooth forms of spiral gear without undergoing expensive experimental procedures.
The measurement process of geometrically obtained tooth forms of a spiral gear is based on an ideal involute profile generated from the optical measurements of one end of the gear. This profile is assumed to be almost perfect based on the general orientation of the LTS and the rotation axis. There are small deviations in the pitch and yaw angles. Lower and upper bounds are determined as – 10 and -10 degrees respectively.
The tooth forms of a spiral gear are derived from replacement spur toothing. However, the tooth shape of a spiral gear is still subject to various limitations. In addition to the tooth shape, the pitch diameter also affects the angular backlash. The values of these two parameters vary for each gear in a mesh. They are related by the transmission ratio. Once this is understood, it is possible to create a gear with a corresponding tooth shape.
As the length and transverse base pitch of a spiral gear are the same, the helix angle of each profile is equal. This is crucial for engagement. An imperfect base pitch results in an uneven load sharing between the gear teeth, which leads to higher than nominal loads in some teeth. This leads to amplitude modulated vibrations and noise. In addition, the boundary point of the root fillet and involute could be reduced or eliminate contact before the tip diameter.
editor by CX 2023-04-12